• Notice regarding image hosts and attachments. See here.

Just my luck, cold boot woes.

Associate
Joined
10 Oct 2006
Posts
348
Location
N.I.
Just my luck with self build, i guess.
Last two big upgrades decided to have problems at cold boot.

On a cold boot i have to restart EVERY TIME, because first boot freezes. Granted, it freezes on windows7 logo, but it ALWAYS boots only on first reset.
Which tells me its hardware related. Motherboard ? PSU ?

Not that its a big deal, but annoying the proverbial brown out of me.

Also, every time after reset win7 wants to do "boot repair", which as we all know is mostly useless and doesn't accomplish anything, i have to reset again... *sigh*...

Any way to remove automatic "boot repair" bull*** ?

i7-2600k, 16gb ram, ocz zx 1000w psu, msi z68a-gd55 g3 mobo...
Win7 64bit.
 
Do you have a multimeter and another harddrive you can use?

At the back of my mind, I'm thinking chipset or chipset drivers - but I'm also thinking it might a harddrive or power related problem.

You would need to measure the voltages across the 12v, 5v and 3.3v lines to make sure the voltages coming from the PSU are fine. It's said you should allow for a 10% margin, but I always allow for a much narrower 5% margin.

Here is a basic guide of what ranges you should be looking for:
12v - 11.40-12.63v
5v - 4.75-5.26v
3.3v - 3.14-3.47v
 
Which tells me its hardware related. Motherboard ? PSU ?

given your packing 16Gb of ram, ide look there first, especially if it's 4x4Gb, could be a bios issue, as in timings or voltage, or even a duff stick?.

If you are using 4x4Gb, try 2x4Gb to see if that helps the issue.
 
Back
Top Bottom