** KOLINK ROCKET V2 - BETTER IN EVERY WAY **

OcUK Staff
Joined
26 Nov 2014
Posts
2,453
Location
Stoke
Available to order today, we have the refresh of the popular Kolink Rocket Mini-ITX Case. Utilizing feedback and designs from internal OcUK design staff, the Rocket V2 offers significantly more compatibility with hardware compared to it's predecessor. Here's a list of the improvements that have been made: -

- Made fully from 2.5mm aluminium throughout including anodized titanium grey outer panels, the original Rocket V1 was a steel interior with 2mm thick aluminium panels.
- Better routed 280mm PCI-E Riser cable - Doesn't partially cover the fan ventilation like on the original.
- Supports 2.9 Slot VGA Cards up to 330mm. The Rocket V1 supported dual slot 310mm cards.
- Comes with a high performance 92mm slim PWM HDB fan. Original fan was 80mm.
- Support for 92mm AIO's or 63mm CPU Coolers. The Rocket V1 didn't support 92mm AIO's previously, and only supported 54mm CPU coolers.
- Removable PSU and fan brackets for easy installation.
- 1 x USB3.2 Type-C + 1 x USB3.0 on the front panel. The Rocket V1 didn't have Type-C.
- Better price! (£139.99 vs £169.99).
- GPU support bracket that is removable if not needed

Whilst a little bigger at 13.8L, there is a lot more scope for building into the Rocket V2, including 92mm AIO's, enthusiast sized graphics cards, SFX or SFX-L power supplies, bigger CPU coolers if preferred, alongside a USB3.2 Type-C port on the front panel. There's a bracket for both the PSU and the fan mounts to allow easy installation of the PSU and fan/AIO if used. There's a 280mm PCI-E Riser cable for routing your VGA card into your Mini-ITX motherboard, and this does not cover ventilation like on the original model.

All in all this is a massive improvement over the original model, and amazingly comes in £30 cheaper! I believe there will be reviews in the next few weeks & I think this is going to be a strong contender in the SFF case market. Order yours today.

Kolink Rocket V2 Aluminium Mini-ITX Case - Titanium Grey @ £139.99 inc VAT



Fully aluminium SFF Mini-ITX case, anodised titanium grey colour, minimalist design, support for 2.9 Slot VGA Cards up to 330mm, 92mm AIO Support, With USB3.2 Type-C and USB3.0, 92mm Slim PWM Fan



Only £139.99 inc VAT.

ORDER NOW
 
Soldato
Joined
21 Sep 2005
Posts
14,518
Location
Bradley Stoke, Bristol
Looks a good step up from the previous version. I still feel like Kolink need to make it look a bit more premium. Exposed screws holding in the side panels looks poor for the style of case imo, they should at minimum be countersunk in! Using an allen key instead of philips head would look nicer too!
 
Top Bottom