Lian-Li PC-A17A top fan removal

Schnippzle · 21 Mar 2016 at 11:54

Since receiving my new PSU, I've realised that I no longer have space for the top fan in my Lian-Li PC-A17A case (The PSU is longer than the case was originally designed for). The problem is that the fan acts as a holding point for the screws holding the mesh in place on top. As a result, having taken the fan out I now have a gaping hole in the top of the case.

Is there a solution available to allow the mesh to be fitted with some kind of contraption underneath to allow the screws holding the mesh in place to screw into?

Schnippzle · 22 Mar 2016 at 13:05

Any takers? Just need some kind of contraption to allow the screws from the top "bite" to hold the mesh in place.

Any advice is greatly appreciated.

BlackBat · 22 Mar 2016 at 20:01

Surely you can just replace the (AFAIK self tapping) screws that hold the fan/mesh in place with similar size screws which use a nut and washer?

Schnippzle · 23 Mar 2016 at 07:32

BlackBat said:
Surely you can just replace the (AFAIK self tapping) screws that hold the fan/mesh in place with similar size screws which use a nut and washer?

Unfortunately not really. The screws are recessed into the top of the case.

BlackBat · 23 Mar 2016 at 09:37

Unless I am misunderstand something, you need countersunk screws, the only problem is getting the correct size. I suggest searching for 'countersunk screw and nut'.

Schnippzle · 23 Mar 2016 at 09:49

Oh cool, yes you're completely right. I'll have to have a look around to see what I can find. Thanks for the heads up