Looking for a case that will fit EK predator 360 up top

enigma27 · 12 May 2016 at 14:18

Hi All.

Just putting a new system together and am going to be using an EK predator 360 RAD plus the GPU water block addon.

Struggling to find any info an cases these 360 rads will fit into base on the extra length due the pump being attached to the end of the rad.

Anyone got one and know what case it might fit into?

only other alternative is to get the 240 version but not sure that would be good enough for both CPU and GPU.

deFiniLoGy · 12 May 2016 at 14:47

enigma27 said:
Hi All.

Just putting a new system together and am going to be using an EK predator 360 RAD plus the GPU water block addon.

Struggling to find any info an cases these 360 rads will fit into base on the extra length due the pump being attached to the end of the rad.

Anyone got one and know what case it might fit into?

only other alternative is to get the 240 version but not sure that would be good enough for both CPU and GPU.

I know the 240 can fit in a Evolv mATX.

As long as you don't put both CPU and GPU in full stress load they should be fine.

Rustyone · 12 May 2016 at 15:20

If you look on EK's site they have a list of cases that can use the Preds.

Petelock · 12 May 2016 at 15:32

I have had one installed in push pull in a Phanteks Enthoo Luxe. Am about to move it to an Evolv.

enigma27 · 12 May 2016 at 15:41

Petelock said:
I have had one installed in push pull in a Phanteks Enthoo Luxe. Am about to move it to an Evolv.

How big is that case? thats full size right..

did look at this one but though it maybe too big for where i am going to use it

enigma27 · 12 May 2016 at 16:10

Just watched a review and think that case will be perfect.

Glanza · 12 May 2016 at 16:19

Phanteks range can fit upto 420mm in the top depending which size case you go for.

Petelock · 12 May 2016 at 16:35

enigma27 said:
Just watched a review and think that case will be perfect.

It is a Full size tower, but it's not as large as the Primo (if that makes sense...?)

The Luxe won;t take a 420. Just be careful if you want to put the Pred in push/pull. If you do then you'll need to mod the case to allow the pump and reservoir to get into the top fan area.

If you're just going with the fans as they come then you'll be fine. Just be careful on your mobo 4 pin power connectors - it can be a bit of a tight fit.

DBT85 · 12 May 2016 at 17:38

The Fractal S can take 420mm rads in the top.

Just got my hands on the case today, very very happy.

Bradley1928 · 15 May 2016 at 14:18

Phantom 630 has enough room for a 360 in the roof.