Looking for a large full tower all white case

crasherkid

crasherkid

crasherkid

Associate
Joined
28 Sep 2014
Posts
79
Can somebody please recommend a large white tower case?
I want something around the same size as the corsair 760T or slightly bigger and with a large window panel.
The 760T insides are all black so I've ruled that out.
I've seen a few NZXT white cases but the window panel is quiet small.
Need space for a 360 rad at the top at least.
Any ideas please?
 
Luxe is very slightly bigger due to the top panel, but internally they are very similar

Looks like 560mm for the Luxe vs 535mm for the Pro
 
Last edited:
Lol I would love a caselabs but don't think I could afford around £600 (after shipping + customs)

So far the Phanteks enthoo Primo seems to be the best case. Does anyone here have one, or anything negative about it I should know.
Many thanks again.
 
I just purchased the Phanteks Enthoo Primo and the only bad thing I can say about it is the weight of the thing when its assembled. It is heavy!

Other than that Phanteks really did go all out on the case and the amount of features included really is worth the price compared to other higher priced full towers.

Just be wary about your GPU length if your using the reservoir bracket as there are clearance issues when fitted and you wont be able to fit cards longer than 257mm.
 
n14hta said:
I just purchased the Phanteks Enthoo Primo and the only bad thing I can say about it is the weight of the thing when its assembled. It is heavy!

Other than that Phanteks really did go all out on the case and the amount of features included really is worth the price compared to other higher priced full towers.

Just be wary about your GPU length if your using the reservoir bracket as there are clearance issues when fitted and you wont be able to fit cards longer than 257mm.
Click to expand...

Thanks for that, much appreciated.
I'm wanting to use the XSPC D5 photon pump/res combo (170mm) and an asus strix 980 GPU. Was thinking of SLI'ing later along the line.
Does this mean the Primo won't be able to house these??
 
If you find it heavy when assembled I could recommend forum user doyll he made me a castor base to wheel it about on, saved my back no end ! Its even heavier full of wc gear !
 
From my friends enthoo build.
The fan hub was unreliable which is quite common and got thrown, and there is a width restriction for a 360+ rad in the bottom.
Other than that its a great case
 
ok, photon 170 in the only real place we could find, keeping all the hard drive racks installed. Single 780ti.




When he sli'd we had to loose the photon and get a 50mm diameter res.




We likes them close....



Hope this helps
 
You can fit a slightly wide rad in the base, see my build log. But you'd have to do some cutting and the holes won't match fully.
 
Okay decided to keep using my corsair 760T case. Well its actually a 730T but using the 760T clear side panel window.
My XSPC photon D5 170 and my Strix 980 is a really really tight fit. I've managed to screw the D5 in but the end of my strix card is just slightly touching the Res. Is this a bad idea?
 
You must log in or register to reply here.
Back
Top Bottom