Loop layout opinions required.

.:SAmSuNG:. · 27 Mar 2015 at 13:21

So pretty got all the required parts for my build now so planning the loop.

This is how I would ideally like it with the video card bridge been parallel but ive always thought series was the way to go.

Would this work ok fine as its by far the neatest solution.

Rads and pump and D5 vario and 2x XSPC Ax240s.

Kipz · 27 Mar 2015 at 13:40

That's pretty much the exact same as I had my loop. Can't see anything wrong with it at all. Which EK Bridge are you using? some don't have two holes at the bottom.

.:SAmSuNG:. · 27 Mar 2015 at 14:21

I've not bought the bridge yet as wasn't sure if it would work and may use pipe between instead as can look good also.

murah · 27 Mar 2015 at 16:04

series or parallel make virtually no difference on temps

.:SAmSuNG:. · 27 Mar 2015 at 17:22

So the fluid is not going to get as far as the GPU blocks as flow straight back to the pump without going through the CPU and ram?