I bought a new ULi M1695 socket 939 board with an athlon 64 3700+. I went for this board as I want to continue to use my AGP Gainward ti4200 for now. I have put it all together but I can’t get it to boot. The fans and drives all spin up but the monitor does not come on. I have checked the obvious things like the monitor is all plugged in and everything seems to be seated fine on the board. The manual says something about some requirements on what AGP cards you can use. I also don’t know if I need to change any jumpers or anything to tell it I’m using agp and ide, and not sata and pci-e as the manual is pretty basic. Anyone got any ideas or is it a duff board?
M1695 Boot problem
- Thread starter Redrum
- Start date
Associate
- Joined
- 17 Oct 2003
- Posts
- 1,895
- Location
- Dublin
try resetting it a few times- it loads bios defaults automatically and allows you to enter the bios.
or at least it should- that feature on mine is a bit tempermental, but will do it eventually.
i dont mind though...it boots fine and everything else works...
TG
or at least it should- that feature on mine is a bit tempermental, but will do it eventually.
i dont mind though...it boots fine and everything else works...
TG