memory voltages
- Thread starter IceShock
- Start date
Soldato
- Joined
- 26 Aug 2004
- Posts
- 3,278
I'd like to know too, I've always wondered about this.
Associate
- Joined
- 20 Sep 2006
- Posts
- 1,418
- Location
- Southampton, England
Everest normaly tells you iirc
thanks
Associate
- Joined
- 20 Sep 2006
- Posts
- 1,418
- Location
- Southampton, England
IIRC, If I Recall Correctly.
I've had to clear CMOS before because of a bad mem overclock, one of the few things that stops you geting into BIOS if it's done very badly, however a CMOS clear gets you back to "safe", but requires you to go back in and input all your settings again.
With my mobo, that's a bit of a pain.... its got 10+ voltage settings just for starters! Clearing CMOS is easy though with my board, you can do it by holding power & reset together for 5sec or so, then letting go. No more fiddling with jumpers inside my case anymore!
I've had to clear CMOS before because of a bad mem overclock, one of the few things that stops you geting into BIOS if it's done very badly, however a CMOS clear gets you back to "safe", but requires you to go back in and input all your settings again.
With my mobo, that's a bit of a pain.... its got 10+ voltage settings just for starters! Clearing CMOS is easy though with my board, you can do it by holding power & reset together for 5sec or so, then letting go. No more fiddling with jumpers inside my case anymore!
yep same. well, with my old motherboard i just had to press a button and it cleared CMOS.
this new motherboard tho, well.
i once did a overclock wrong with it (cause iv never had intel befor),
and it reset its self to the settings i had befor the overclock and it said overclock settings unstable (resetting automaticly) when it rebooted.
i was like, sweet thats handy, but im not sure if it was just cause i had a few settings wrong, i didnt go overboard i dno what would happen if i did a really wrong overclock, id probibly have to take battery out i think..
by the way, does any one know where the Ram voltages are for the p5w dh deluxe, i cant find the settings :S i tryed 4-4-4-12 but it couldnt run it, not enough voltage to the ram. well it booted but was unstable
this new motherboard tho, well.
i once did a overclock wrong with it (cause iv never had intel befor),
and it reset its self to the settings i had befor the overclock and it said overclock settings unstable (resetting automaticly) when it rebooted.
i was like, sweet thats handy, but im not sure if it was just cause i had a few settings wrong, i didnt go overboard i dno what would happen if i did a really wrong overclock, id probibly have to take battery out i think..
by the way, does any one know where the Ram voltages are for the p5w dh deluxe, i cant find the settings :S i tryed 4-4-4-12 but it couldnt run it, not enough voltage to the ram. well it booted but was unstable
Soldato
- Joined
- 1 Sep 2005
- Posts
- 10,001
- Location
- Scottish Highlands
Im not sure if its the same, but the ram voltages for the P5B deluxe are in the 'jumperless settings' tab, where you set the fsb and vcore etc.