Minesweeper Have to guess?

Associate
Joined
20 Oct 2005
Posts
1,900
Location
Suffolk, UK
d71f665b94.jpg


Solvable, or is a guess necessary?
 
Middle flagged one at the bottom left isn't a mine. Neither is there a mine directly above the first 3 on the left (I.e. 2 up from the flagged one).
 
Capture.png

Just about any other combination would give too many or too little to the '4'. Also, what Delta said.

edit: Moving the top one left and the middle one down also works. Dammit.
 
Last edited:
That one next to the one could easily be just above, not to the left. Otherwise I agree.

Problem is it could just as easily be the polar opposite and would work equally well. :p
 
The 2 on the left means there is a mine diagonally up from it. This means the second 2 immediately next to it is now contacting 2 mines and therefore the middle flagged one is not a mine.

Aren't the flags found mines. The blue tiles are the unknown ones?
 
The 2 on the left means there is a mine diagonally up from it. This means the second 2 immediately next to it is now contacting 2 mines and therefore the middle flagged one is not a mine.

Both of those 2's are each only touching two squares, which MUST be mines.

1a9f947ca5.jpg
 
Thanks for showing the rest of the board. That wasn't clear in the original image.

What I showed in the original image was enough to disprove your thinking. The second 2 in from the left was only touching 2 of the bottom 3 squares, along with the adjacent 3 that is only touching the bottom 3 squares. Do you see? The second slightly expanded image wasn't necessary, it just showed the mine you could and did presume was adjacent to the left-most 2.
 
Back
Top Bottom