Hi all and welcome to my thread didnt know to put here or in case central as it is a mod on my rid which involves me rebuilding it oh the joy 
The rig in question is the rig in sig which i had not long upgraded to 470 sli which as i found out runs so hot and loud even in this case which is ment to be good for gpu cooling lol
So to begin with i bought these few parts to install in my case which where a 140mm & 180mm silverstone air penatrator's plus a 140mm hole saw and some mx4 for the gpus
I want to mount it on the back of the outside off my case where the rad is here
But 1st ill have to space my rad more to allow clearance for the fan as they are mount with this brackets atm
And these are the bits ill use to space it more M4 screw + nut and a big washer to silence the noise for the fans virabtion all got from wickes lol
To do this iam going to need to drill the rad, que the BHP451 this is a beast as you will see later
On my 1st hole i slip and drilled the rad gutted !
so decided to carry on and ordered PA120.4 so it seemed an upgrade and wasnt so heart broken 
And here it is on its new mountings
Time to see if the fan will fit and what do you know ...... Likeeee aaaa gloooooveee !
Once it was in position i marked it ready for drilling and removed the rad and all componants
Bring on the Beast
The hole took less the 30 seconds and look at how clean that is was hardly any filling needed most pleased
Now to do the mounting holes and get it fixed and get the componants back in
This is my favriote picture looks a bit like a v6 manifold
Now to re-apply the TIM on the GPU's was really impressed with how the coolers came apart well designed for re-apply TIM
Fermi Porn
All most there just the gpus to put back in and tube up
Just waiting on the PA120.4 but all wired and ready with the leaky .3
Finally finished ready for leak testing the PA120.4 it is a beast off a rad made my .3 look small
And back in its place ready for Shift 2 hope you enjoyed reading through my little mod sorry it isnt very well detailed as done it once took me ages and then deleted by mistake 
but iam glad to report that the temps droped from about 91 degrees @82% to 75 degrees @76% with custom fan profile much better now many thanks again for reading
The rig in question is the rig in sig which i had not long upgraded to 470 sli which as i found out runs so hot and loud even in this case which is ment to be good for gpu cooling lol
So to begin with i bought these few parts to install in my case which where a 140mm & 180mm silverstone air penatrator's plus a 140mm hole saw and some mx4 for the gpus
I want to mount it on the back of the outside off my case where the rad is here
But 1st ill have to space my rad more to allow clearance for the fan as they are mount with this brackets atm
And these are the bits ill use to space it more M4 screw + nut and a big washer to silence the noise for the fans virabtion all got from wickes lol
To do this iam going to need to drill the rad, que the BHP451
this is a beast as you will see later
On my 1st hole i slip and drilled the rad gutted !
so decided to carry on and ordered PA120.4 so it seemed an upgrade and wasnt so heart broken 
And here it is on its new mountings
Time to see if the fan will fit and what do you know ...... Likeeee aaaa gloooooveee !
Once it was in position i marked it ready for drilling and removed the rad and all componants
Bring on the Beast
The hole took less the 30 seconds and look at how clean that is was hardly any filling needed most pleased
Now to do the mounting holes and get it fixed and get the componants back in
This is my favriote picture looks a bit like a v6 manifold
Now to re-apply the TIM on the GPU's was really impressed with how the coolers came apart well designed for re-apply TIM
Fermi Porn
All most there just the gpus to put back in and tube up
Just waiting on the PA120.4 but all wired and ready with the leaky .3
Finally finished ready for leak testing the PA120.4 it is a beast off a rad made my .3 look small
And back in its place ready for Shift 2
hope you enjoyed reading through my little mod sorry it isnt very well detailed as done it once took me ages and then deleted by mistake but iam glad to report that the temps droped from about 91 degrees @82% to 75 degrees @76% with custom fan profile much better now many thanks again for reading
Last edited:
.
