Good Morning All,
I'm hoping some of you bright sparks out there can help me out!
Recently I took on one of those "5 minute jobs" for a friend, and as we all know they never last for 5 minutes. Taking a quick look inside I noticed that it was completely clogged full of dirt/crap/wildlife, you know the usual. So I stripped it down to a shell cleaned it all out and put it back together as it should be. Now... here's where the fun starts. I was very good at documenting where everything came from, what everything was plugged into and how it originally went together.
So now i've put it all back into the case I cannot get this to boot. Here are the specs
1. Asus P5Q SE Motherboard
2. Nvidia GeForce 8800GTS OC
3. Modular 500w PSU (Looks Cheapo)
4. Hyper X Memory, (2x1GB @ 2.2V, 1x4GB @ 2.3v) Different voltages but same speeds.
5. CPU = Intel Q9450 Quad, No Overclock
Right so what I have tried is this...
1. Plugging in absolutely nothing, no memory, no drives etc, just graphics card. No Difference
2. Trying single sticks of memory in each DIMM Slot and dual configuration. No Difference.
3. Tested PSU, CPU and Graphics Card in other PC's. All OK
4. Removed CMOS
I have noticed from the PSU where it should have a 12v 4 pin or 12v 8 pin it doesn't, there is a connector on the board which fits the 4 pin plug and converts it to a molex plug, is this normal? It looks like it should belong to a graphics card of some sort. Although I have tried another PSU with a 12v to 4 pin and this gives the same result so I'm assuming this is OK. Also when power is on I do get the Green LED on the board to say it has power.
My question to you guys is this, Is anyone familiar with this particular board and can point out something blindingly obvious that I am doing wrong. Maybe it has to have memory loaded in a particular channel to run? Or has to have a certain amount of devices attached or something silly which I'm missing. If you need any more info don't hesitate to ask.
I'm now running out of ideas fast, other than soldering a beeper onto the board to see if I can get any beep codes!!
Thank you in advance
.
I'm hoping some of you bright sparks out there can help me out!
Recently I took on one of those "5 minute jobs" for a friend, and as we all know they never last for 5 minutes. Taking a quick look inside I noticed that it was completely clogged full of dirt/crap/wildlife, you know the usual. So I stripped it down to a shell cleaned it all out and put it back together as it should be. Now... here's where the fun starts. I was very good at documenting where everything came from, what everything was plugged into and how it originally went together.
So now i've put it all back into the case I cannot get this to boot. Here are the specs
1. Asus P5Q SE Motherboard
2. Nvidia GeForce 8800GTS OC
3. Modular 500w PSU (Looks Cheapo)
4. Hyper X Memory, (2x1GB @ 2.2V, 1x4GB @ 2.3v) Different voltages but same speeds.
5. CPU = Intel Q9450 Quad, No Overclock
Right so what I have tried is this...
1. Plugging in absolutely nothing, no memory, no drives etc, just graphics card. No Difference
2. Trying single sticks of memory in each DIMM Slot and dual configuration. No Difference.
3. Tested PSU, CPU and Graphics Card in other PC's. All OK
4. Removed CMOS
I have noticed from the PSU where it should have a 12v 4 pin or 12v 8 pin it doesn't, there is a connector on the board which fits the 4 pin plug and converts it to a molex plug, is this normal? It looks like it should belong to a graphics card of some sort. Although I have tried another PSU with a 12v to 4 pin and this gives the same result so I'm assuming this is OK. Also when power is on I do get the Green LED on the board to say it has power.
My question to you guys is this, Is anyone familiar with this particular board and can point out something blindingly obvious that I am doing wrong. Maybe it has to have memory loaded in a particular channel to run? Or has to have a certain amount of devices attached or something silly which I'm missing. If you need any more info don't hesitate to ask.
I'm now running out of ideas fast, other than soldering a beeper onto the board to see if I can get any beep codes!!
Thank you in advance
.
Last edited: