msi z77 gd65 no display in bios
- Thread starter imginy
- Start date
Caporegime
Hi,
Is this HDMI from the board or GFX card?
Is this HDMI from the board or GFX card?
graphics card
Caporegime
Does it work if you connect directly to the motherboard?
Yes it works fine as long as my 7950 isn't in there.
Works fine with my 660ti in there and also works fine with my 6790 in there.
For some reason when my new 7950 is plugged in my bios runs at 640x480 which doesn't work for me.
Caporegime
IS there a bios update available for the card?
I'm not sure but probably so I will try that.
Caporegime
its either a motherboard bios or gpu bios issue,have you tested with dvi or vga cable if your monitor has them?
I'm going to try new bios on both tonight.
Also having some really big problems with my motherboard and my samsung green memory.
It will only boot up on 1600mhz 9,9,9, anything better I get overclock failed.
Caporegime
Again it could be bios that's limiting your memory overclock,you could try 10-11-11-28-1t timings with 1.55v dram and 2133mhz
I just got a message off msi support and they sent me some unreleased bios that seem to have sorted my ram issues.
On stock bios I could run 2133mhz but it was a bit iffy sometimes posting and then after changing to latest bios I couldn't even boot at anything other than 1600mhz on auto. Even with 1.65v in it wouldn't boot at anything other than 1600mhz.
On the bios I got today from customer support I went straight in for 2133mhz 10,12,12 and it booted straight away.
I haven't got round to tightening timings up yet but hopefully msi have fixed the compatibility issues with the samsung green and I will be able to run at 2133mhz 9,11,11 21.
Still since putting in the amd 7950 card the bios are still running in 640x480 which isn't supported by a lot of screens. I have tried updating motherboard bios and it didn't help and my graphics card is already on latest bios.
It's really annoying having to use a different screen to access my bios and can't seem to find a fix but lots of people are having same problem.
Soldato
I have this same board and sammy ram. I'm using the latest official bios which A80 but there is a slightly newer beta in the msi forum but think it only had one bug fix. Been using the sammy ram at 2133mhz for quite a few bios versions now and been stable also in a long mem test.
What timings you getting?
On the stock bios the best I could get was 2133mhz 10,12,12 21 1t
On the bios E7751IMS.A80 I couldn't even post on any timings other than stock.
On latest bios E7751IMS.A90 I'm already running 2133mhz 9,10,10 21 1t
Last edited:
Caporegime
you need to tell msi about the graphic card issue aswell,maybe they can fix that
Soldato
Have mine on 9, 10, 10, 21 1t @ 1.5280 DRAM Voltage
Here's my bios screen shots (in the spoiler), I did these a while back on an older bios version but I took them so I could reinstate my OC whenever I updated the bios as I found I could never reload an OC profile created in a different bios version. It has a slight issue which I'm yet to solve though as it used to revert the CPU to 3.4Ghz on idle and since a bios update a few version ago it doesn't do that anymore. Apart from that I think its just the graphics that have changed as I was using just integrated back then but now have a 7970.
Maybe your mem is harder to get stable due to your higher CPU OC.
Here's my bios screen shots (in the spoiler), I did these a while back on an older bios version but I took them so I could reinstate my OC whenever I updated the bios as I found I could never reload an OC profile created in a different bios version. It has a slight issue which I'm yet to solve though as it used to revert the CPU to 3.4Ghz on idle and since a bios update a few version ago it doesn't do that anymore. Apart from that I think its just the graphics that have changed as I was using just integrated back then but now have a 7970.
Maybe your mem is harder to get stable due to your higher CPU OC.
Soldato
Also, when you updated the bios did it also update the intel management engine, I say this as I discovered that sometimes the bios available for download from msi product page may state in the change notes that it does, it actually didn't. When I got the same version from the forum it also had the IME firmware update in it. I then also updated the IME driver by downloading this from msi product page and installing within windows.
Deleted member 2277
D
Deleted member 2277
What version bios did MSI send you? I have the same board and memory but I cannot get past 1866mhz