my in desk build

Associate
Joined
29 Oct 2005
Posts
1,151
Location
wakefield
finally got this little project sorted after bits been sat idle until I was well enough to finish it,still needs some wires tidying up and mouse and kb wires re routing when I feel upto it.
asus 1070 dual,i5 6400,2x 240gb ssds,420 radiator and magicool v2 pump,bykski water blocks
its basically made inside the desk and the whole lot sildes out on rails like a drawer with radiator on front,so I can do any tinkering with the whole lot on the desk still running

its covered internally with black neoprene and looks really cool close up
temps are mid 20's at idle and under 40 running benchmarks and ive finally managed to get a decent overclock on the 1070 :)

I used a pcie extension ribbon from liheat..works perfect with zero performance drop.



IMG_20170624_143004553_zpsozub40oo.jpg



IMG_20170624_143031695_zpsipox2ruh.jpg



IMG_20170625_222010027_zpsgcmrhmbm.jpg
 
Last edited:
Associate
OP
Joined
29 Oct 2005
Posts
1,151
Location
wakefield
thanks guys
this is basically the drawer it sits in,i then have 4 mushroom head bolts per side screwed into the underside of the desk in a line,this allows the 2 silver 20x20 profile rails to slide onto the bolt heads and hang from under the desk meaning it all just slides in as 1 unit so easy for maintenance.
IMG_20170615_085734481_zps0tbw6juf.jpg

IMG_20170615_130935178_zpsilkfh49p.jpg
 
Associate
OP
Joined
29 Oct 2005
Posts
1,151
Location
wakefield
thankyou :)

I'm just trying to decide what colour fluid to change to,at the moment its just Halfords water and the blue ink from one of those fluro stabilo marker pens I had lying about.

I'm thinking white fluid but not sure yet.
 
Back
Top Bottom