My 9800X3D Jonsbo D41 build

BornEvil · Saturday at 14:25

Hi OcUK,

This is nothing special, just a bog standard build. I just wanted a place to archive my build log.

It's in a Jonsbo D41 Black with Screen:

Jonsbo D41 Standard Screen ATX PC Case – Black, Tempered Glass

Order Jonsbo D41 Standard Screen ATX PC Case – Black, Tempered Glass now online and benefit from fast delivery.

www.overclockers.co.uk

Smart little case, I think I bought last one OCUK had in stock.

Specs:

AMD Ryzen 7 9800X3D (Pre-ordered)
32GB KLEVV CRAS V DDR5 6400Mhz CL32
Gigabyte X870E Aorus Elite WIFI7
Arctic Freezer III 360 ARGB
Seasonic 760 Platinum PSU
China Special PSU extension cables
Jonsbo D41

GPU Pending
6 Fans Pending (Lian Li Uni SL wireless maybe)

BornEvil · Saturday at 14:45

What's currently arrived:

Awaiting:

AMD Ryzen 7 9800X3D Eight Core 5.20GHz (Socket AM5) Processor - Retail

Order AMD Ryzen 7 9800X3D Eight Core 5.20GHz (Socket AM5) Processor - Retail now online and benefit from fast delivery.

www.overclockers.co.uk

Hopefully wave 1

Gigabyte Radeon RX 7800 XT Gaming OC 16GB GDDR6 PCI-Express Graphics Card

Order Gigabyte Radeon RX 7800 XT Gaming OC 16GB GDDR6 PCI-Express Graphics Card now online and benefit from fast delivery.

www.overclockers.co.uk

This is a temp card until 5080 releases, currently on back order, ordered @£399.99. Will happily wait, or cancel if too close to 5080 release. My GTX1070 will have to hang on to life support for a few more months

BornEvil · Saturday at 15:01

KLEVV 32GB DDR5 6400 CL32, beautiful piece of kit, shame i can't be shown off once it is in the build

jms198 · Saturday at 15:02

I got the d31 which it quite nice, a little flimsy when you take all the panels off. What's the argd plan?

BornEvil · Saturday at 15:07

Currently looking like this:

Rob_B · Saturday at 15:09

what are you going to have on the screen?
looks like your existing setup is under the desk so what will you see?

BornEvil · Saturday at 15:13

jms198 said:
I got the d31 which it quite nice, a little flimsy when you take all the panels off. What's the argd plan?

Yeah, 100% agree, it does flex a bit when panels are off, nothing special in build quality.

It is basically a £65 when bought without the screen, it is not bad but nowhere near high end stuff i used to before.

RGB Plan: OFF! I bought RGB cos i wanted a black/grey theme, and RGB is on sometimes to impress my nieces and nephews when they come around

BornEvil · Saturday at 15:22

Rob_B said:
what are you going to have on the screen?
looks like your existing setup is under the desk so what will you see?

nah, its on the desk far right

i don't know what i'm gonna put on the screen. People put custom dashboards with AIDA64.

I see my motherboard has a front HDMI out, so might as well have a screen

jms198 · Sunday at 00:08

BornEvil said:
Yeah, 100% agree, it does flex a bit when panels are off, nothing special in build quality.

It is basically a £65 when bought without the screen, it is not bad but nowhere near high end stuff i used to before.

RGB Plan: OFF! I bought RGB cos i wanted a black/grey theme, and RGB is on sometimes to impress my nieces and nephews when they come around

You can turn it on for Xmas!

The D31 is my son's, he has a a320 with no headers so I need to buy a controller. I fear he is going to use some garish flashing lights. There are a lot of nice features like the recessed motherboard.

BornEvil · Sunday at 17:49

It’s a smart little case, very small considering what it can hold.

It was to be a stop gap case before the Phanteks Evolv X2 releases but it has grown on me.

WARburton · 2024-11-11T11:35:46+0000

is it just my old eyes or as the case had a hit.. it looks bent

WARburton · 2024-11-11T11:36:20+0000

my brother as the same case its actually very nice

BornEvil said:
I see my motherboard has a front HDMI out, so might as well have a screen

will this still work with a GPU fitted? io would think it will case conflict

BornEvil · 2024-11-11T12:35:24+0000

WARburton said:
is it just my old eyes or as the case had a hit.. it looks bent

Yes! I had the AIO strapped with wire and the weight bent the case...

, but cos it is so flimsy, i was able to bend it back!

BornEvil · 2024-11-11T12:37:19+0000

WARburton said:
my brother as the same case its actually very nice

will this still work with a GPU fitted? io would think it will case conflict

i assume the iGPU would work simultaneously with the PCI-E GPU

xtremedetailz · 2024-11-11T18:12:07+0000

Looks decent bud

WARburton · 2024-11-11T23:09:39+0000

BornEvil said:
i assume the iGPU would work simultaneously with the PCI-E GPU

i could very much be wrong, and often am haha... but i was always told with PC's not laptop's its one or the other

BornEvil · 2024-11-12T02:30:13+0000

WARburton said:
i could very much be wrong, and often am haha... but i was always told with PC's not laptop's its one or the other

Dunno till my CPU arrives, this week needs to go quicker!

Varys · 2024-11-12T04:16:19+0000

I'd need toilet roll too if I'd spent all that money

BornEvil · 2024-11-12T14:15:15+0000

Varys said:
I'd need toilet roll too if I'd spent all that money

It is not too bad, considering I will be using it for 4 years minimum, I’m long past the time where I need the latest and greatest very year due to other commitments.