My 9800X3D Jonsbo D41 build

BornEvil

BornEvil

BornEvil

Associate
Joined
18 Oct 2002
Posts
766
Location
London
Hi OcUK,

This is nothing special, just a bog standard build. I just wanted a place to archive my build log.

It's in a Jonsbo D41 Black with Screen:

www.overclockers.co.uk

Jonsbo D41 Standard Screen ATX PC Case – Black, Tempered Glass

Order Jonsbo D41 Standard Screen ATX PC Case – Black, Tempered Glass now online and benefit from fast delivery.
www.overclockers.co.uk www.overclockers.co.uk
Smart little case, I think I bought last one OCUK had in stock.

Specs:

AMD Ryzen 7 9800X3D (Pre-ordered)
32GB KLEVV CRAS V DDR5 6400Mhz CL32
Gigabyte X870E Aorus Elite WIFI7
Arctic Freezer III 360 ARGB
Seasonic 760 Platinum PSU
China Special PSU extension cables
Jonsbo D41

GPU Pending
6 Fans Pending (Lian Li Uni SL wireless maybe)
 
Last edited:
What's currently arrived:
o8vo86vh.jpg


Awaiting:
www.overclockers.co.uk

AMD Ryzen 7 9800X3D Eight Core 5.20GHz (Socket AM5) Processor - Retail

Order AMD Ryzen 7 9800X3D Eight Core 5.20GHz (Socket AM5) Processor - Retail now online and benefit from fast delivery.
www.overclockers.co.uk www.overclockers.co.uk
Hopefully wave 1

www.overclockers.co.uk

Gigabyte Radeon RX 7800 XT Gaming OC 16GB GDDR6 PCI-Express Graphics Card

Order Gigabyte Radeon RX 7800 XT Gaming OC 16GB GDDR6 PCI-Express Graphics Card now online and benefit from fast delivery.
www.overclockers.co.uk www.overclockers.co.uk
This is a temp card until 5080 releases, currently on back order, ordered @£399.99. Will happily wait, or cancel if too close to 5080 release. My GTX1070 will have to hang on to life support for a few more months
 
Last edited:
jms198 said:
I got the d31 which it quite nice, a little flimsy when you take all the panels off. What's the argd plan?
Click to expand...
Yeah, 100% agree, it does flex a bit when panels are off, nothing special in build quality.

It is basically a £65 when bought without the screen, it is not bad but nowhere near high end stuff i used to before.

RGB Plan: OFF! I bought RGB cos i wanted a black/grey theme, and RGB is on sometimes to impress my nieces and nephews when they come around
 
Last edited:
Rob_B said:
what are you going to have on the screen?
looks like your existing setup is under the desk so what will you see?
Click to expand...
7bOBxuWh.jpg

nah, its on the desk far right

i don't know what i'm gonna put on the screen. People put custom dashboards with AIDA64.

I see my motherboard has a front HDMI out, so might as well have a screen
 
It’s a smart little case, very small considering what it can hold.

It was to be a stop gap case before the Phanteks Evolv X2 releases but it has grown on me.
 
WARburton said:
my brother as the same case its actually very nice


will this still work with a GPU fitted? io would think it will case conflict
Click to expand...

fyi, the front HDMI port uses the iGPU and it can work simultaneously with a PCIE GPU.

The problem is that i will need to install Geforce Experience and AMD Adrenalin on the same computer. And the iGPU uses ~28 watts as well as sharing RAM.

Its not worth the hassle, i'll just run HDMI cable through the back into the GPU card.
 
Last edited:
WARburton said:
how are you finding the pump noise on the AIO, any thing passed 55% and mine is very loud at passed 80% i can stand to be near my pc
im going to RMA it
Click to expand...
Same result as you. How can people leave that thing at 100%?

I run:
Pump at 20% (1300rpm)
Fans at 40% (500rpm)

Constant line. I have not done any stability/temperature test yet, but not crashed at all yet.

I like the fans a lot though, can't get RGB working, but don't really care tbh
 
Last edited:
WARburton said:
yes ive used the same fan type on a few AIO's they really are good. my pc is on the floor and at upto 900rpm there silent for me and do one hell of a job cooling.

i have my pump at 50% and it silent, when i game iv got it set to move to 70% where the game and GPU noise covers it, i'm going to see how it is over the weekend and decide Monday if im RMA'ing it.
it is a good cooler would some good cooling capacity



i dont have a pump RPM readout so i had no idea it was running so fast at low PWM percentage, this dose change my mind a little about RMA'ing it
Click to expand...
At full speed it is ~2800rpm. At 1200-1800rpm, it is about the same loudness, but lower rpm= lower pitch humm, which I prefer.

At my above PWM settings, my 9800X3D seems perfectly stable with a slight overclock, (still learning PBO).
 
patroza said:
You’re ok with the tension on the hoses?
I plan same build with SFX-L and ASUS tuf 4090 oc (350mm).
I came from Cerberus X, now got a Phanteks XT Pro, but I feel like the d41 will be the sweetspot
Click to expand...
The tubes are fine, there is a little tension but temps seem good.

My PSU (160mm long) is sitting on the lowest possible mounting, so it will limit my GPU length to 330mm. If my ATX PSU is 150mm long, it might clear a very long GPU. So SFX-L might not be necessary.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom