my new o/c from my little e6300

ok got the system to boot into windows at 3.70 then it hangs grr got it stable at 3.62 now don't know what else i can adjust maybe am as far as i can go
 
Last edited:
THIS IS ON AIR AS WELL
362stabled.jpg
 
I'm jelous of those temps.

You can add more vcore yet.

As I've said increase it to 1.5v on CPU and see if it works, then you can work your way down to decrease the voltage after you know its stable at this one.
Your temps are still very low so it's ok : ).
 
i had it 1.5 volts at 3.70 but it wasen't stable in windows nb voltage was at 1.5 any other recomendations what i could change in the bios as theres heaps of options for voltages i don't know what to adjust its a asus p5q delux p45
 
Ah in that case u mite have hit ur FSB wall or the chip limit. Prob da FSB as 515 is really impressive, drop the vcore back and enjoy.

Hawker
 
yeah i was thinking i might have hut my limmit i did try 3.68 this morning system booted fine got into windows ran stress test for about 5mins then in failed ah well am happy with what ive gotten out of the chip
 
I would put 1.6v then and see if that works ! :D
But it's just me, I've been putting 2.0v through some CPUs to see what they can do :X.

Go go, 100% OCs are very rare nowadays, especially on Air I don't think many ppl have managed this or even get close.

Did you unlink the memory and run it at the stock speeds?? It might be one blocking you.

--------
When you hit your FSB limit, it won't even POST, so you know as long as it POSTs, it just needs more volts :-)).
 
memory is as low as it will go lol it posts at 3.75 just wont get into windows lol so more volts is the answer temps are going up slighy might push above 60*c just to get a screenshot :D
 
You must log in or register to reply here.
Back
Top Bottom