NEC MultiSync 24WMGX3 sound help

A good option is a 3.5mm jack splitter to get sound on both simultaneosly.
Have you tried plugging them in and setting them both as the same type of speakers? i.e. both line out
 
well, I can't really tell... but the spec says.. It does have 3.5mm somewhere.

"Specification Summary

* Diagonal: 24 inches
* Panel Technology: AMVA TFT
* Backlight: CCFL
* Native Resolution: 1,920 x 1,200
* Contrast Ratio: 1,000:1 / 2,000:1 (dynamic)
* Brightness: 500 cd/m²
* Pixel Response: 6ms (grey-to-grey), 16ms (black-to-white)
* Viewing Angles: 178/178 degrees H/V
* Inputs: DVI-D (with HDCP), 2x HDMI, D-Sub, Component, Composite, S-video, 3.5mm audio, 2x phono (L+R)
* Outputs: Optical S/PDIF, 3.5mm audio, 3.5mm headphone
* Chassis Adjust: Height, Tilt, Swivel
* Extras: IR Remote (with 2x AAA batteries), 2x 5W surround sound speakers, Picture-in-Picture functionality
* Warranty: Three years (parts and labour), including backlight"
 
i couldnt be bothered to look at mine before, but i have looked now, its next to the vga port
 
ive got the monitor and my speakers plug in to the same jack with a splitter but can't get audio on me monitor? the audio on monitor is at 100% but not geting any thing.
 
why dont you use the monitor as the front left and right, and your other speakers for rear left and right, for a sort of surround sound effect. (the speakers on the monitor are prity to poor to be honest, probably worst bit of the screen, they arent very loud at all.)

edit:- i think there are 2 sockets underneath there, you have it plugged in the correct one??
 
Last edited:
why dont you use the monitor as the front left and right, and your other speakers for rear left and right, for a sort of surround sound effect. (the speakers on the monitor are prity to poor to be honest, probably worst bit of the screen, they arent very loud at all.)

edit:- i think there are 2 sockets underneath there, you have it plugged in the correct one??
do you think its not worth doing it then?
 
also does any body know how to set the pc up with HDMI ive set it in the OS but till it gets in the OS it gos to DVI and ive got 3 OS so i haf to go to DVI then go to HDMI wen in OS does any one know how to set it up so that it just gos to HDMI?
 
ive got the monitor and my speakers plug in to the same jack with a splitter but can't get audio on me monitor? the audio on monitor is at 100% but not geting any thing.

think you might need to go into the menu, and go sounds, then audio select.
 
umm turn pc off, discon dvi/vga or whatever, plug in hdmi into pc and monitor, turn on pc, should do all the work for you???
 
Back
Top Bottom