• Notice regarding image hosts and attachments. See here.

Need advice

Associate
Joined
9 Feb 2011
Posts
495
Location
Central London
Hey Guys,

I'm really thinking to upgrade my motherboard and processor. First of all before I continue I use my PC for gaming purposes. Currently my PC specs are:

Gigabyte H55M-UD2H (1156 slot)
16GB Corsair XMS3 (4x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit
MSI ATI Radeon 6850 1024mb Cyclone Power Edition
i3 3.3hz (clarkdale) processor
XFX 750w PSU
Antec 400 Gaming case

My main concern is that by upgrading my CPU and MB is if my computer overheats. Im thinking to purchase these components;

Motherboard
http://www.overclockers.co.uk/showproduct.php?prodid=MB-054-AK

Processors (its a choice out of two)

http://www.overclockers.co.uk/showproduct.php?prodid=CP-361-IN

http://www.overclockers.co.uk/showproduct.php?prodid=CP-359-IN

What processor will be worth it? Im not planning to overclock as Im not sure how to do it even though I'd love to know how. Anyway would my PC be okay if I used the stock heatsink which comes with the processor or will it be recommened to buy a new one? If i have to buy a new one, I'd more n likely go for the i5 2500 processor. Thank you reading, as i found it quite difficult to explain haha. Im a PC noob.

Kindest Regards
Stefan
 
Last edited:
Hey Guys,

I'm really thinking to upgrade my motherboard and processor. First of all before I continue my PC specs are:

Gigabyte H55M-UD2H (1156 slot)
16GB Corsair XMS3 (4x4GB) DDR3 PC3-12800C9 1600MHz Dual Channel Kit
MSI ATI Radeon 6850 1024mb Cyclone Power Edition
i3 3.3hz (clarkdale) processor
XFX 750w PSU
Antec 400 Gaming case

My main concern is that by upgrading my CPU and MB is if my computer overheats. Im thinking to purchase these components;

Motherboard
http://www.overclockers.co.uk/showproduct.php?prodid=MB-054-AK

Processors (its a choice out of two)

http://www.overclockers.co.uk/showproduct.php?prodid=CP-361-IN

http://www.overclockers.co.uk/showproduct.php?prodid=CP-359-IN

What processor will be worth it? Im not planning to overclock as Im not sure how to do it even though I'd love to know how. Anyway would my PC be okay if I used the stock heatsink which comes with the processor or will it be recommened to buy a new one? If i have to buy a new one, I'd more n likely go for the i5 2500 processor. Thank you reading, as i found it quite difficult to explain haha. Im a PC noob.

Kindest Regards
Stefan

Go for the i5 2500K - it's very easy to overclock a very quick google will give you a video instruction. I believe it is as simple with the Sandybridge CPUs as adjusting the multiplier.

The stock cooler is fine at stock speeds and will even allow overclocking just not as far as an aftermarket cooler. I think around 4.0Ghz is fine with stock cooler but owners can confirm this for you.

If you were going to buy a new cooler this is very popular:

http://www.overclockers.co.uk/showproduct.php?prodid=HS-001-GD&groupid=701&catid=57&subcat=1395

GZA
 
Thank you so much GZA that has been a lot of help and looks like I will be going for it :). I might just go for i5 2500 and just buy that cooler considering its cheap price! Maybe in the future I probably will get myself an SSD too.

To make sure, will that heatsink fit into the Antec 400 case? Im probably guessing so haha.
 
[WU-TANG]GZA;21002160 said:
Go for the i5 2500K - it's very easy to overclock a very quick google will give you a video instruction. I believe it is as simple with the Sandybridge CPUs as adjusting the multiplier.

The stock cooler is fine at stock speeds and will even allow overclocking just not as far as an aftermarket cooler. I think around 4.0Ghz is fine with stock cooler but owners can confirm this for you.

If you were going to buy a new cooler this is very popular:

http://www.overclockers.co.uk/showproduct.php?prodid=HS-001-GD&groupid=701&catid=57&subcat=1395

GZA


This, also if you go for the K version, then if you decide to overclock later you can!
 
Thank you for both of your help. I'm really grateful and now it looks like ive got some thinking to do for tonight :). More and likely go for it

Thank you again.
Stefan
 
No problem. BTW, that is a great motherboard, but you can get a cheaper one if you wanted to save some money? Nothing wrong with your choice.

Enjoy your new components :)
 
Yeah, just to clarify - you can only overclock with the K version.

It seems as though you know this and beejacobs alluded to it but I just wanted it to be 100% clear for you.

Good luck and have fun - very nice components !
 
Thank you for informing me :)
I was aware by it as I read the item descriptions, so I will buy the k series just incase if I do eventually decide to overclock. I will get that heatsink too with some thermal paste and just hope it fits :D.

Thank you both again :). All I think I need now is some screws for the motherboard and Its ready to go!
 
The Gelid comes with thermal paste (though I do like to have spare).

What screws do you need? Your case should have come with what you need? If not they are cheap in bulk usually!
 
Oh, will that thermal paste be any good though? :)

I need some stand offs and the screws which fit them, when i brought my case the stand offs did not match with the given screws. The screws were too small :(. As my motherboard is only microatx i probably wont have enough for the new motherboard as thats ATX. What I had to do was take the stand offs and screws from my old case and use them for the new case, which is the Antec 400.
 
"It’s also worth noting that while Gelid does include a tube of its own brand of TIM, there’s precious little here for more than a couple of applications. Even then, the GC Extreme thermal compound was a devil to spread evenly, acting like a putty under pressure and clumping infuriatingly. The cooler’s manual advises you to simply deposit a blob onto the centre of your CPU and then fit the cooler on top, rather than spread it around first. In the end, this is what we were forced to do because achieving an even spread ourselves was incredibly difficult."
http://www.bit-tech.net/hardware/2010/01/20/gelid-tranquillo-cpu-cooler-review/2
Gelid make thermal paste themselves I believe, so it should be decent stuff (even if they make it sound hard to put on :P)

Yeah make sure you have enough standoffs then. I don't think OCUK do them (can't find any) but they shouldn't be expensive! I'm surprised the ones which came with the case didn't fit. I don't mean to be rude, but were you using the right ones?

They should be like:
33GdB.webp

(though I've not had them with washers before)
 
LOL, they do make it sound difficult haha even though it isnt as ive seen it done :D.
I read the item description and it says the heatsink somes with MC2 thermal compound which is multi-award winning so im guessing its good :).

Ive found a place which sells them so I will go there and get some. No, not rude at all, but yeah I was using the right ones cus I tried many of the screws given and none of them fitted. After looking at some of the reviews from previous customers on the Antec 400 case, I wasnt the only one who had the problem. However, because I was so eager to get my pc all set up and kind of excited to get it running I couldnt be bothered to complain haha.
 
LOL, they do make it sound difficult haha even though it isnt as ive seen it done :D.
I read the item description and it says the heatsink somes with MC2 thermal compound which is multi-award winning so im guessing its good :).

Sweet. Should be good then :P

Ive found a place which sells them so I will go there and get some. No, not rude at all, but yeah I was using the right ones cus I tried many of the screws given and none of them fitted. After looking at some of the reviews from previous customers on the Antec 400 case, I wasnt the only one who had the problem. However, because I was so eager to get my pc all set up and kind of excited to get it running I couldnt be bothered to complain haha.

Fair enough. I know the feeling. I hate the effort of complaining for small things and just rather sort it myself!
 
Yeah Im the exact same, I couldnt deal with waiting a few days just cus of that small problem :).
Thank you for all your help as Im very appreciated and I will now get these new components and wont have to worry about upgrading for quite some time :)
 
Yeah Im the exact same, I couldnt deal with waiting a few days just cus of that small problem :).
Thank you for all your help as Im very appreciated and I will now get these new components and wont have to worry about upgrading for quite some time :)

Not a problem. Enjoy it :)

Post some pictures if you like too!
 
Back
Top Bottom