Associate
hi guys
guys i have problem i think cant get my head around because it my first time water cooling and wasn't sure about inlets and outlets on the pump and if i need more then one pump, dual loop because i dont know if th d5 is strong enough may have some restriction in that loop i l explain further of what im trying to achieve in my project.
basically i have the cosmos2 i m going to put 360 rad at top and 2 dual rads at bottom.
the motherboard is going to be the Asus formula thuderfx the one with 2 barbs for the mosfit.
the ek res 150 is going to sit on the left side of the illuminated acrylic which is going to have water channel in the mid plate it self.
the res is going to have feed on top it
the outlet is going to go through the acrylic water channel and exits into one of the rads and out into the d5 pump and then back in the second rad and then straight up to the 360 at the top inlet back out the outlet in the inlet mosfit (top of cpu end) and then out of outlet of mosetfit into the cpu out of the cpu into the gpu and back to res.
in between the rad two rads there is to be drain loop.
so my question are ,is the pump in the wright place, should i i go from res to pump or am i ok to go from res to rad then pump,is it going to be strong enough or do i need to add another pump somewhere in the loop or shall do dual loop.
if you dont understand or something is clear please let me know icould provide more information.
at moment all i have is the case im just brain storming , researching planning on getting the asus formula mobo so i can see how much space i have and can play with the top rad.
i look forward to your advise my whole case modding is on hold because i need to make the wright cuts and mods before i paint he case.
guys i have problem i think cant get my head around because it my first time water cooling and wasn't sure about inlets and outlets on the pump and if i need more then one pump, dual loop because i dont know if th d5 is strong enough may have some restriction in that loop i l explain further of what im trying to achieve in my project.
basically i have the cosmos2 i m going to put 360 rad at top and 2 dual rads at bottom.
the motherboard is going to be the Asus formula thuderfx the one with 2 barbs for the mosfit.
the ek res 150 is going to sit on the left side of the illuminated acrylic which is going to have water channel in the mid plate it self.
the res is going to have feed on top it
the outlet is going to go through the acrylic water channel and exits into one of the rads and out into the d5 pump and then back in the second rad and then straight up to the 360 at the top inlet back out the outlet in the inlet mosfit (top of cpu end) and then out of outlet of mosetfit into the cpu out of the cpu into the gpu and back to res.
in between the rad two rads there is to be drain loop.
so my question are ,is the pump in the wright place, should i i go from res to pump or am i ok to go from res to rad then pump,is it going to be strong enough or do i need to add another pump somewhere in the loop or shall do dual loop.
if you dont understand or something is clear please let me know icould provide more information.
at moment all i have is the case im just brain storming , researching planning on getting the asus formula mobo so i can see how much space i have and can play with the top rad.
i look forward to your advise my whole case modding is on hold because i need to make the wright cuts and mods before i paint he case.
Last edited: