Need some help on my clock for my E6300 (pic inside)

KnightStalker · 24 Sep 2006 at 10:12

Ok guys, after a very long research session yesterday and learning the bios settings and a lot of sweating i finally got to 3ghz but not very stable, 20 mins i get a system reboot with temps being below 50 usually 45 or so.

need some help on how to get it stable, the only thing i know of is CPU-Z for this sort of thing, but if you know something that will help please say so and ill get the screenshots up

Thanks in Advance. Help me get it stable

Edit sorry the mainboard is the Gigabyte DS3 and ram is the GeIL 2GB PC6400 800MHz Ultra Low Latency

FreeStream · 24 Sep 2006 at 11:08

More mem voltage/core voltage.

Might be that the mem wont go any further, mine wont go past 430

KnightStalker · 24 Sep 2006 at 11:13

ok so more volts all round, timings and all that look ok though right? and am i right in thinking, keeping the ratio 1:1 is the best option?

Cob · 24 Sep 2006 at 12:55

Have you set the RAM voltage to 2.1v (+3)? That's the Geils preferred voltage at pc6400 speeds.

And yeah 1:1 is probably the best for the Geil on a e6300.

KnightStalker · 24 Sep 2006 at 13:35

yea its been +3 since yesterday, upped the volts to 1.4 dead on and its been priming for the last hour and a half at 3.0ghz without breaking a sweat

KnightStalker · 24 Sep 2006 at 18:21

Alright guys, primed for 5 hours at 3ghz and no errors, this is using the blend technique in Orthos, so its looking good, thanks for the help guys