• Notice regarding image hosts and attachments. See here.

New Build CPU FAN Error..

Associate
Joined
20 Jan 2012
Posts
14
Location
United Kingdom
Hey guys, i'm a new builder, well, it's my first time putting a rig up together, anyway, I received my components today..

A CPU, MOBO, RAM, GPU and CPU Cooler, I have looked up multiple videos on how to build a computer etc... So I have some knowledge on the basics..

Now, everything is connected and in place, all pins connected in the correct places etc, now when I boot the PC, it gives me and error saying..

"CPU Fan Error, press F1 to go into SETUP!"

Now just to mention, I've used my current HDD which I had from my old build, and already has Windows 7 installed..

So now, sometimes when I boot the PC up, it bypasses the error and leads to Starting Windows screen, and two seconds in, the PC will switch off and reboot it self, any suggestions to what could be causing the problem?

My Specs are -
i5 2500k
ASUS PZ68-V LX
8 GB Corsair DDR3
EVGA 460 GTX
Artic Cooling Freezer 13 Pro
 
Okay, firstly when this happen is your CPU fan spinning? If not, it's not plugged in the right place or it's broken.

Also, I'd recommend you didn't just use your old HDD, it can lead to issues when you get new parts such as mobos
 
The CPU Fan is spinning, but the case fans ain't, I read on the manual, saying connect the FAN to the CPU cooler Pin, so that can't be a fault there..

Also, what do you mean about the HDD sentence?
 
Very strange that it is saying CPU Fan error. Are the other fans plugged into 3-pins on the motherboard, or are they powered by your PSU?

Regards to the HDD, if you have an old install of Windows and motherboard it's generally best practice to reinstall Windows, just because you get issues with it
 
I can't see any pins comming from the fans, so i'm assuming they are powered by the PSU, even so, checking the BIOS, the CPU and MOBO temperature are stable, and constantly at 20 - 30'C, and i'd love to re-install windows, only problem like I mentioned, is the fact that I can't get passed the loading windows part... :(

From what I read online, people said that the motherboard could be damage from when installing the CPU Cooler, I hope this ain't true..
 
Check the manual this MB is a specific cpu fan header. If nothing is connected to this header then it could be causing the error.
 
From what I see on the motherboard, there are four different connectors all powering the fans.. One is the CPU cooler, which I have connected, the other three are..

"CHA_FAN2" , "CHA_FAN1" and "PWR_FAN", are they all the same thing, do you think I should try switching the CPU Cooler Pin to these? As they are all four pins?
 
I heard that switching off the fan readers in the bios would help prevent this issue, if the temp is stable...

So what would you suggest for the PC restarting when the windows logo appears? Is this something to do with the HDD?

As 'Silenced' mention that re-installing windows 7 would help, but the fact that I can't even get to that point without the PC re-booting is a complete pain..
 
I somehow think that if you change the motherboard in a PC, a Windows 7 re-install is essential, just because your install doesn't know what motherboard it is supposed to be controlling, hence the hanging on loading
 
Back
Top Bottom