• Notice regarding image hosts and attachments. See here.

New build crashing

Associate
Joined
17 May 2009
Posts
131
Location
Suffolk
Good morning,

I bought 90% of a new rig from Overclockers earlier this week, assembled it on Friday and started using it yesterday. I've installed Battlefield 3, the Orange box, and Portal 2. As well as Unigine Heaven 2.5 benchmark program.

Problems started about 5 minutes into a Battlefield round, when I got a frozen screen and a 1 second loop of sound. The computer went unresponsive and had to be hard restarted. I tried BF3 a few more times with the same results, sometimes up to an hour of play and sometimes just a black or grey screen, but always requiring a hard restart.

The same problem occurs with Unigine but sometimes a whole run of the bench test can be completed.

Specs are:

  • Intel Core i7-2600K 3.40GHz
  • Asrock Z68 Extreme4 Gen3 Intel
  • Western Digital Caviar Black 1TB
  • EVGA GeForce GTX 460 Superclocked 1024MB
  • Lepa B-Series 850W '80 Plus Bronze' Modular Power Supply
  • Cooler Master CM-690 II Advanced Dominator Case
  • Kingston HyperX Genesis 16GB (4x4GB) DDR3 PC3-12800C9 1600MHz
  • Asus DVD-RW
  • Corsair H50
  • Windows 7 Ultimate

I have the latest drivers for the GPU, and have tried legacy and beta drivers.

My first instinct is Graphics card, but could PSU be the problem?

Any ideas?

Cheers

tl;dr graphics dead, sad Sherpa
 
It could be a faulty graphics card, couple of things just to try.

Remove the memory bar one module and see how you get on, what voltage is the memory running at and speed,, I have one at 1.55v and 1600mhz.

Do you have the possibility of trying the gpu in another system or put one in your system.

Is your system overclocked or still at stock.
 
Hi,

RAM is at 1.65v at the moment, which seems to be at the top end of the RAM's range, and is running at 1333mhz.

Unfortunately no other graphics or rigs available.

I'll try a single RAM stick and report back

edit: is not overclocked at the moment, but I have tried it over and under clocked to see if that was the cause
 
Sorry I didn't update sooner. Ran Memtest for 24 hours with no errors, so have RMA'd the card.

Cheers for the help RJC

Sherpa
 
If its only BF3, I would say re-install the card drivers minus the audio drivers (I assume it can output audio through hdmi?).

Then make sure you have the proper motherboard sound drivers installed. Ie Realtek.

It's a known BF3 issue. Used to happen to myself until I done the above.
 
Back
Top Bottom