• Notice regarding image hosts and attachments. See here.

new build error, possible suspect?

Associate
Joined
24 Jul 2007
Posts
1,907
Location
Swansea, Wales
Ok all the new parts arrived today, happy days, however i think either the ram is borked or the motherboard. If i put the ram ( 2 x 4gig) in to slots 1 + 3 or 2 + 4, then i get no display. If i put either one or both in to slots 3 + 4, then it posts.

which one is the more likely suspect? or am i missing something :)?
 
Look up the manual. It's dual channel ram, so they are configured to work in tandem in two slots (depends on motherboard layouts, could be 1+2, 1+3, 2+4, 3+4). It's possible your motherboard is refusing to boot / post without the proper ram configuration. Mine works 1+3 (called DDR3_A1, and DDR3_B1). Usually the dual slots share the same colour.
 
indeedy, i would normally use the same coloured slots, however its the first two slots that seem to give the problem.
 
try upping the ram volts when using slots 3+4 to the reccomended volts then try the other slots, its been a while since ive seen this but back in early ddr2 days this had to be done for ram above 1.9v
 
Back
Top Bottom