Associate
- Joined
- 27 Sep 2005
- Posts
- 113
Hi all built a new system.
Chassis is a Level 10 GT Liquid Cool System (LCS), with the following inside:
Asus P8Z68-V Intel Z68 (Socket 1155) DDR3 Motherboard
Gigabyte GeForce GTX 570 OC WINDFORCE 3X 1280MB GDDR5 PCI-Express Graphics Card
Intel Core i5-2500K 3.30GHz (Sandybridge) Socket LGA1155 Processor
Corsair Enthusiast Series TX 850W V2 High Performance '80 Plus Bronze' Power Supply (CMPSU-850TXV2UK)
Corsair Vengeance 16GB (4x4GB) DDR3 PC3-12800C9 1600MHz Dual/Quad Channel Kit (CMZ16GX3M4A1600C9)
OCZ Agility 3 60GB 2.5" SATA-3 Solid State Hard Drive (AGT3-25SAT3-60G)
Just purchased froom good old Overclockers....
OK the reason why I am here, when you press the power on button it starts, then it switches-off then it restarts again and loads into windows.
When it habinates, you press the poer button and it springs to life or seems to but the harddrive doenst restart. Had a look at OCZ firmware and their is an update but it cant be done as this drive is my windows boot drive. Can anyone think of antyhting else within the setup that might be causing the issue that I am seeing that requires firmaware or driver upgrade!!?
Chassis is a Level 10 GT Liquid Cool System (LCS), with the following inside:
Asus P8Z68-V Intel Z68 (Socket 1155) DDR3 Motherboard
Gigabyte GeForce GTX 570 OC WINDFORCE 3X 1280MB GDDR5 PCI-Express Graphics Card
Intel Core i5-2500K 3.30GHz (Sandybridge) Socket LGA1155 Processor
Corsair Enthusiast Series TX 850W V2 High Performance '80 Plus Bronze' Power Supply (CMPSU-850TXV2UK)
Corsair Vengeance 16GB (4x4GB) DDR3 PC3-12800C9 1600MHz Dual/Quad Channel Kit (CMZ16GX3M4A1600C9)
OCZ Agility 3 60GB 2.5" SATA-3 Solid State Hard Drive (AGT3-25SAT3-60G)
Just purchased froom good old Overclockers....
OK the reason why I am here, when you press the power on button it starts, then it switches-off then it restarts again and loads into windows.
When it habinates, you press the poer button and it springs to life or seems to but the harddrive doenst restart.
Had a look at OCZ firmware and their is an update but it cant be done as this drive is my windows boot drive. Can anyone think of antyhting else within the setup that might be causing the issue that I am seeing that requires firmaware or driver upgrade!!?
