new build wont boot

addictedtopain

addictedtopain

addictedtopain

Associate
Joined
7 Jun 2010
Posts
73
just finished building my new build, Everythings connected in the right place,

It powers on but doesn't load into bios boot. I've tried placing 1 stick of ram in the first slot and trying to boot

Cpu is generating heat so thats working, power supply is working as its providing power to the motherboard and disk drives.

theres some lights on my mother board that says the cpu is running at 100% and so is the north bridge

my spec is

i7 950 not overclocked.
Corsair Dominator 6gb dd3 1600mhz
gigabyte x58 UD3R
Radeon 5770 vapor-x DDR5

If you need any more details let me know

Thanks in advanced :)
 
Tried a CMOS reset, sometimes this works.

8 pin for CPU power connected, Test ram in other slots. When I did my i7 build I put the ram in the wrong slots.
 
I had done the same, I always learnt to put them closest to the CPU, but manual says opposite,

That still hasn't fixed it though, And 8pin is deffinatly connected. It has a CMOS reset on the back as theres a button feature. however this hasnt solved it, and I dont have a jumper to test it out that way
 
You must log in or register to reply here.
Back
Top Bottom