New computer doesn't run

Urban03

Urban03

Urban03

Associate
Joined
22 Feb 2020
Posts
25
Hi if some of you remember my nick then you know I was buying stuff for my PC. Link to description of previous subject https://forums.overclockers.co.uk/threads/psu-case-cooler-for-my-bought-components.18954866/

So I started playing puzzles and built a PC but the PC didn't run when I made a test run. On my Motherboard, even LEDs don't shine.
My PC
Motherboard MPG Z490 wifi
CPU I9-10850k
RAM Kit Barrettes mémoire 32Go (2x16Go) DIMM DDR4 G.Skill RipJaws V PC4-25600 (3200 Mhz)
Samsung 860 EVO 1 TB SATA 2.5 Inch
PSU Corsair RM 750
CASE Phanteks Eclipse P500 Air ATX Case Tempered Glass
I already I can suspect that I connected a lot of devices from CASE because I didn't get any instructions with the case
I made sure I power SW I would turn around and maybe will run but it doesn't. I don't have the equipment to test PSU

Any Suggestions let me know
 
Last edited:
Ok I ony case that I bought from overclock power sw is broken and I need to run pc using screwdriver. On motherboard two LEDs are lighting the most long is about ram and also from CPU but like from a moment. Will tell me what is wrong?
 
Are the memory sticks inserted int he correct slots and fully in?
vyLZCz8.jpg


Are all of the power connectors for the motherboard and CPU connected and fully inserted?
fwrpNfU.jpg


Power switch being broken seems kinda weird since it's basically 2 wires that connect hen the button is pressed

are you sure the polarity is correct? if the connectors to t he case don't have + and - they will have a triangle instead ^ with that symbol meaning it's the positive + side

ampUKAB.jpg



You could also try with just one stick of ram, maybe one of the sticks is faulty.
 
arknor said:
Are the memory sticks inserted int he correct slots and fully in?
vyLZCz8.jpg


Are all of the power connectors for the motherboard and CPU connected and fully inserted?
fwrpNfU.jpg


Power switch being broken seems kinda weird since it's basically 2 wires that connect hen the button is pressed

are you sure the polarity is correct? if the connectors to t he case don't have + and - they will have a triangle instead ^ with that symbol meaning it's the positive + side

ampUKAB.jpg



You could also try with just one stick of ram, maybe one of the sticks is faulty.
Click to expand...
I moved ram and yeah bios showed up I installed Windows 10 but power sw still doesn't function no matter how I put. The case Don't have reset button so I all the time I'm gonna use screwdriver or I will buy separate power sw button on a cable. Can I on my case buy cables that will be good for change or not?
 
IDK how the power button is on your case, like if it can be pulled out and put back.

Maybe worth contacting phanteks support and saying the power button doesn't work and see if they can send you a replacement button or something.

if you put your PC to sleep instead of turning it off then you can wake it with a key press or mouse click.

sleep should only use 5-10 watts so essentially the same as shut down anyway
 
Maybe the power switch has disconnected at the case end (ie. where it connects to the front panel or switch assembly).
 
Is that part at the top of the front behind the front panel where the power switch routes to? I can't tell from images/videos because no one seems to specifically point out what it is, certainly looks like it and appears to be removable with a couple of screws. Be worth having a look at that and seeing if someone just messed up connecting it properly at the factory.
 
You must log in or register to reply here.
Back
Top Bottom