• Notice regarding image hosts and attachments. See here.

new FX bundle not working :/

Associate
Joined
26 Dec 2011
Posts
15
I have recently purchased a http://www.overclockers.co.uk/showproduct.php?prodid=BU-188-OK
And after placing it all in my tower checking everything is plugged in correctly it did not work, my current hardware exluding the package above is :
ATI Radeon HD 4670
G7 680W PSU
when I attempt to switch the pc on, I get no display and the processor fan is rather slow (assuming this is because it's not being used) any tips on what might be the issue before I send it back? basicly just wondering if its faulty or if somewhere along the line I've missed something :/ been a rather disapointing christmas :(((
 
Welcome,

Thats not good to hear. I hope t can be fixed.

It seems to me its either a PSU or motherboard problem. Your PSU isn't the greatest
Is there a way you can check you PSU (and GPU, why not?) in another PC?
 
My current GPU works fine in my previous motherboard (one I have to use now :( ) the PSU is brand new and supposedly meets the requirements and it currently works fine with my current set up
 
For the graphics, you may have to change a setting in bios so it uses a gpu card instead of onboard.

Remove the card and connect your monitor to the motherboard vga/dvi/hdmi socket.

Processor fan running slow, could be "Cool and Quiet" or what ever AMD use.

Got to agree with Doomedspeed about the PSU.
 
OcUK recommend a quality brand PSU for use with all our bundles such as the Corsair TX & HX range.

I'm afraid that a £29.99 PSU may not cut it and suspect that this is the problem.
 
check the bios version as am3+ with FX cpus seem to have problems.The latest bios for cpu compatibility is 0801,anything below 0510 wont be FX compatible.
 
Last edited:
Are all power connectors connected including the 8 pin for CPU power, also try one memory module and a CMOS reset.
 
I have tried a CMOS Reset, for the 8 pin connector I use a 4 pin to 8 pin converter. could that be the issue? I've tried using a 750W power supply and it made no difference I'm starting to think that the PSU isn't the issue :(
Also I can not get onto the BIOS as there is no display, I've tried using every display port both on my graphics card and the onboard chipset. Given that I think I may just need to send it back if I cannot even get to the BIOS :(
 
Last edited:
Ok tried it put of the tower and tried each Memory module to no success, From what I've read the required power for this board is 500W so I'm almost positive the PSU is out of the picture. I've also just remembered its a Dual BIOS and this is the first time I have encountered this :O
 
What port is the monitor connected to?

Try testing with only onboard gpu and double check the monitor is working if possible and the correct input is selected.

Edit: seen you tried this :(
 
Is it possible the motherboard isn't on the latest bios? The FX chips weren't supported on the original release one.
Don't suppose you have an older AM3 chip to try?
 
The op bought it as a bundle and I would have thought Ocuk would have made sure all is compatable, unless one board got through with a older BIOS.
 
Back
Top Bottom