**NEW GEN 6 OCUK TECH LABS COOLERS inc 92MM**

[Robbie_G]

Hi,

Asetek have recently updated the AIO coolers to Gen 6 meaning that we can now launch our refresh on the popular OcUK Tech labs bundles.

The Gen 6 pump offers an improved thermal performance and quieter operation over the previous generation.

Included in this launch is the new 92mm AIO cooler which is suitable for small form factor builds. The cooler has been designed with the Dan cases in mind meaning these are fully compatible.

The cooler holds a 15mm thick fan which is a Noctua fan on the bundle but can be changed to any up to 15mm thick fan. If you wish to add a thicker fan to the rear of the cooler and your case will allow it then this can also be done. The cooler only comes with the screws to attach the radiator to the case and attach a 15mm fan to the cooler.

Below are the refreshed bundles:


OcUK Tech Labs 92mm Extreme CPU Liquid Cooling Upgrade Bundle @ £82.99 inc VAT



OcUK Tech Labs Extreme All In One CPU Liquid Coolers offer high tier performance at epic price points to cater for all CPU overclocking requirements.



Only £82.99 inc VAT.

ORDER NOW




OcUK Tech Labs 240mm Extreme CPU Liquid Cooling Upgrade Bundle @ £89.99 inc VAT



OcUK Tech Labs Extreme All In One CPU Liquid Coolers offer high tier performance at epic price points to cater for all CPU overclocking requirements.


Only £89.99 inc VAT.

ORDER NOW



OcUK Tech Labs 360mm Extreme CPU Liquid Cooling Upgrade Bundle @ £119.99 inc VAT



OcUK Tech Labs Extreme All In One CPU Liquid Coolers offer high tier performance at epic price points to cater for all CPU overclocking requirements.



Only £119.99 inc VAT.

ORDER NOW

 

[Robbie_G]

Nice. Thinking of going SFF myself. Speaking of which, will OcUK be stocking v4 of the Dan A4?

Hi,

I believe we will be but I think it's roughly 6-7 weeks away yet.

 

[Robbie_G]

Hi,

Unfortunately we are not allowed to sell the cooler without the fan on any of the Asetek coolers that is Asetek's terms. I have asked the question anyway to see what they say. The cooler has been designed with the Dan case in mind and that means it uses a 15mm thick fan as a 25mm Fan will not fit under the tubing. You can fit a 25mm on the back but it makes the cooler too thick. The cooler also only comes with screws for a 15mm thick fan meaning you would need to source screws for a 25mm yourself.

There are very limited 15mm thick 92mm fans available.

 

[Robbie_G]

The Asetek units are the same unit used by more than half of them. Some will still be on the old Gen but the new Gen 6 offers a slightly better performance maybe a couple of degrees and is quieter.

Asus and Nzxt use Asetek coolers. Corsair use asetek as well on the none Platinum coolers as they have gone back to using Coolit for those models.

 

[Robbie_G]

As these are assembled to order is there any option to buy them without the £17 Noctua fan? As for anyone planning to use a different one it's a bit of a turn off.

I have been struggling to find a black 92mm fan that is 15mm thick that isn’t a server grade noise turbine.

 

[Robbie_G]

You can use a regular thickness fan if you're not using a Dan case.

Hi,

Yes you can use a 25mm fan on the rear if you wish but the cooler does not come with the screws to mount that size fan. At the moment we are only offering this bundle as we have limited quantity. We are currently looking into further options but that will be a few months before we have anything.

 

[Robbie_G]

The ID Cooling I have spoken to the distributor here in the UK and he says he can't get them in quick enough but maybe when the next batch lands roughly June time. We are also working on a fan ourselves for the next batch.

Akasa no longer stock that fan.

 

[Robbie_G]

Hi @Robbie_G. I was about to pull the trigger on one of the 92mm AIO units (and pre-order the Dan A4). The store says all options for the Asetek are in stock, but when I add the AM4 variant to my basket, it shows availability as "Pre-Order". Is this just because the kit has to be put together by OcUK Tech Labs, or are you actually out of stock?

Hi,

We sold the last couple of units today but we are expecting more stock to land on the 10th May.

 

[Robbie_G]

Hi,

So after a shipping error we seem to have received lot's of tools rather than the coolers. We have 30 coolers landing today but the rest will be around the 15th apologies for the delay.

 

[Robbie_G]

Hi,

Stock is now available again and ready to ship.

 

[Robbie_G]

Hi,

Yes it will.

 

[Robbie_G]

Hi,

Yes they are compatible.

 

[Robbie_G]

Hi,

I'm not sure as it is a 3pin header. I could be wrong as these are both used by Corsair and NZXT but the controller board inside may only work with there software.

 

[Robbie_G]

@Robbie_G I noticed the 360mm and 240mm are no longer available, any reason why as they haven't been out very long?

Hi Sorry we had to pull them from sale due to a conflict with the supplier. Due to the product been used by many other manufacturers we were unable to sell them as our own unit.

It may just be a case that we have to offer add-ons to sell it but until at least next week I will not be able to have them online.

 

[Robbie_G]

Oh ok as long as there isn't an issue with them. I'm really happy with my 240mm on my 1080ti.

Yeah nothing wrong with them. I'm thinking maybe adding to the bundle a GPU cooler option but I need to find out if that is enough to re-list.