New motherboard troubles

nuttyprot · 2 Jul 2011 at 13:50

Ok my asus M5A99x EVo today arrived today. Setup everything turn on pc got BSOD when windows tried to boot. So decided to reinstall windows thinbnking that was the cause. Well when windows install restarts to continue the install. I still getting bsod. And cant continue the install. I am At a lost what to do now.

Removed ram to check the problem still there.

phenom II 965 BE
XMS3 1600 8gb

About to check a dif cpu any ideas if this does not work?

nuttyprot · 2 Jul 2011 at 14:00

New cpu same thing im lost now.

Also tried dif psu and gpu.

nuttyprot · 2 Jul 2011 at 17:09

So far I have

1. Checked Ram in dif slots and on its own. (separate sticks)
2. Tried dif cpu
3. Tried dif psu
4. Tried dif gpu
5. Changed about 1 billion settings in bios

All out of ideas the thing just wont boot.

Spoke to tech support they said to rma the board but I am still within 7 days so decided to rma it if they don't find a fault get a refund if they do find a fault change for another motherboard. Bit of a &^%£ paid sat delivery and now got to pay more to send it back.

gareth170 · 2 Jul 2011 at 21:09

have u tried lowering your ram speed + timing?

nuttyprot · 2 Jul 2011 at 21:12

gareth170 said:
have u tried lowering your ram speed + timing?

Yep

. Also tried at manufacturers specs and default settings. Even tried the asus auto optimizer. Also checking motherboard support lists the XMS3 is supported. Same as the 965BE.

gareth170 · 2 Jul 2011 at 21:15

nuttyprot said:
Yep

or could be the raid driver. try a older driver

or try installing windows on 1 hdd in ide mode

nuttyprot · 2 Jul 2011 at 21:17

gareth170 said:
or could be the raid driver. try a older driver

or try installing windows on 1 hdd in ide mode

Already tried. I even tried to install windows xp never even get to install config settings it bsod the second it finished loading the files for setup. After tried windows 7 half a dozen times.

gareth170 · 2 Jul 2011 at 21:20

is everything at stock?

try giving the cpu alittle more voltage

nuttyprot · 2 Jul 2011 at 21:22

gareth170 said:
is everything at stock?

try giving the cpu alittle more voltage

LoL already tried no dif

. tbh if there a bios setting Iv changed it to try get this thing to work.

I also tried underclocking the cpu slightly.

gareth170 · 2 Jul 2011 at 21:24

nuttyprot said:
LoL already tried no dif . tbh if there a bios setting Iv changed it to try get this thing to work.

I also tried underclocking the cpu slightly.

tried 1 stick of ram?

nuttyprot · 2 Jul 2011 at 21:25

gareth170 said:
tried 1 stick of ram?

Yep and in dif slots. Tried both sticks separately.

gareth170 · 2 Jul 2011 at 21:27

nuttyprot said:
Yep and in dif slots. Tried both sticks separately.

does the board have 2 sata controllers or 1?

also maybe it doesn't like a 4gb stick.

nuttyprot · 2 Jul 2011 at 21:32

tbh I think 2 but not 100% sure there are 2 sets of sata ports. Some gray ones and some black ones. One reads sata 6g and the other set sata 3g.

All drives are in the gray sata6g ports. 2 cd drives and 2 hard drives. Bare in mind the manual states to run optical drives in the sata3g if installing via disk. i tried via usb and disk so should in theory make no difference.

Also motherboard bios only show settings for one controller and detects all drives properly.

gareth170 · 2 Jul 2011 at 21:35

nuttyprot said:
tbh I think 2 but not 100% sure there are 2 sets of sata ports. Some gray ones and some black ones. One reads sata 6g and the other set sata 3g.

try the hdd in sata 3g and put them in ide mode just has a test

gareth170 · 2 Jul 2011 at 21:38

also has i said the board may not like a 4gb sticks.

nuttyprot · 2 Jul 2011 at 21:38

gareth170 said:
try the hdd in sata 3g and put them in ide mode just has a test

Back in a hour time to rebuild it again

. Packed it back up. As felt I ruled out everything.

Edit: Will try tomoz way to tiered now. been at it all day.

gareth170 · 2 Jul 2011 at 21:42

nuttyprot said:
Back in a hour time to rebuild it again . Packed it back up. As felt I ruled out everything.

if you've already packed just let them test it

nuttyprot · 2 Jul 2011 at 21:46

gareth170 said:
if you've already packed just let them test it

Ok probably the best option tbh as you can see I have done everything I possible can. Even if it did somehow work in the other sata ports the motherboard would be basically useless to me as only 2 sata 3g ports and 6 x 6g ports, and I need a min 4 ports.

Basically I have sent rma ticket. How good are OCUK at detecting faults?

I believe that the motherboard is faulty. I have spoken to tech support on the phone and they also believe that I have tried everything I could, and recommended I RMA the board. So I explained I am still within 7 day of buying the board and would it be possible to RMA the board and if they do not find a fault with the board to receive a refund instead, but if they find a fault receive a replacement.

Tech support said that this would be fine and no problems.

Not had to RMA items due to faults before so I am a little worried. Any idea how long takes for them to test it? As wana get this sorted before 7 days are up so I can get a refund if they somehow find no fault.

I wonder if the Gigabyte UD3 has same Voltage issues as the UD5/UD7. Gigabyte would have been my first choice. If someone could confirm that the UD3 dont have the same issues as the other Gigabyte boards I wonder if OCUK would switch them for me?

gareth170 · 2 Jul 2011 at 22:00

if u send it monday and they receive it tuesday which is within the 7days, the tests doesn't come in to that

has long as they receive it within the 7days , your fine

boosfuk · 2 Jul 2011 at 22:04

If it helps my 990X EVO is rock solid using 2x4GB Corsair memory. Voltages are good with a mild overclock on a Phenom II 720BE.
Lovely board, must be a problem with yours.