New order won't fit with my old PSU

OryxBeisa · 15 Mar 2019 at 14:34

Bought near a full upgrade this week, been trying to put it together. My old SuperFlower gold 650w PSU will not fit the holes of the enthoo pro case at all. In fact, the holes all seem to be simply too high for the PSU.

My old Corsair 200r had no issue, at a bit of a loss as to what I can do, and googling is very awkward as I'm stuck on a phone until I get this build done.

I've added pictures, maybe I'm missing something. This PSU should still be alright I'd imagine.

http://imgur.com/gallery/VtJKOW6

OryxBeisa · 15 Mar 2019 at 14:46

https://uk.************.com/product/4Pbp99/super-flower-power-supply-sf650f14mg

https://uk.************.com/product/mn3RsY/phanteks-case-phes614pbk

PSU & Case if anyone can help

OryxBeisa · 16 Mar 2019 at 22:58

Thanks very much, it's in now. Sadly, there's no power on and I've double checked the cables. I bought a psu tester from Amazon and I'm going to unseat the motherboard to see if part of it isn't raised from the case or something.

Hopefully I can get it fixed by Monday.

OryxBeisa · 17 Mar 2019 at 12:09

...aaand, the triple check. After testing the power supply (fine) and tripping the power button on the motherboard with minimal parts installed and no case (fine), it looks like there was probably the 24-pin partly loose and all is fine.

Thanks for the quick delivery on all my parts, I'll ask the case manufacturers for some extra pads though, I only had 2 in all.