new pc build turns on but no screen help

georgew91 · 24 Jul 2013 at 16:47

hello i have just put together my 2nd pc build it all turns on all the fans work from the cpu and gpu but it wont get any picture. I tried the gpu and the onboard graphics its the same for both

i don't have a bios speaker to check for errors

what could it be.

i5 4670k
msi z87 g45
corsair cx 750m
g skill ares 8gb ram 2x4gb
1x ssd
1x 1tb hdd
1x 2tb hdd
vtx3d 7870 black

Doomedspeed · 24 Jul 2013 at 16:56

have you tried dvi, VGA and hmdi? I could be a fault port, cable or monitor port.

georgew91 · 24 Jul 2013 at 16:57

i seem to have fixed it i dont know how all i did was plug the keyboard and mouse in the usb 2.0 slots and turned it on and off a million times

georgew91 · 24 Jul 2013 at 17:22

okay i have it working but i cant get my ssd to read on the sata port when my hdd's are plugged in. but when i disconnect the hdd's my ssd will work and show as sata port 1. what can i do to make my pc read both my hdd's and my ssd together?

Doomedspeed · 24 Jul 2013 at 17:31

Have you changed your boot settings in the bios to load from the ssd first?

georgew91 · 24 Jul 2013 at 17:49

yh it is my 1st boot device it boots fine when my hdd's are not plugged in then when i plug my hdd's it doesn't even read it

georgew91 · 24 Jul 2013 at 18:31

found out the problem it was the nzxt switch 810 hdd ssd conversion slot thing i was using

Doomedspeed · 24 Jul 2013 at 19:03

georgew91 said:
found out the problem it was the nzxt switch 810 hdd ssd conversion slot thing i was using

Never heard of it. Glad it's sorted.