* New Product Parvum S 2.0 mATX Cases in Stock!*

Apem · 22 Feb 2014 at 09:49

Thats cool RJK just wondered m8 as it was posted earlier this week they were coming in was all

rjk · 22 Feb 2014 at 10:51

S1.0 is not produced any more, the S2.0 has superseded it

GiraffePencils · 22 Feb 2014 at 11:03

parvumsystems said:
We plan to start stocking OCUK with different colour accent kits and mid walls. To feature a wider range of colours including metallic and UV acrylic. Additionally we plan sell each panel individually. This will be great for anyone wanting to change colours or try their hand at modding. We've all been there with that Dremel and made a few mistakes in the past

This is really great to hear, It's great to know that it's not a whole case replacement if you mess up a mod/prototype.
How would the inlay's, custom detailing work when purchasing a Parvum through OCUK?

rjk · 22 Feb 2014 at 11:21

They will be available as a case accessory. So you would purchase them separately and then rebuild the case with the new panels.

hawkhench · 22 Feb 2014 at 11:57

Just seen the different colours in the OcUK store, sexy

GiraffePencils · 22 Feb 2014 at 12:32

rjkoneill said:
They will be available as a case accessory. So you would purchase them separately and then rebuild the case with the new panels.

so you would buy a full case, then the detailed ponels seperate.
Leaving you with spare panels? ( useful for replacements/ experimenting)

smilertoo · 22 Feb 2014 at 18:01

If they could rubberise this to reduce noise and vibration i'd give it a look, i cant see how solid acrylic can be quiet though.

rjk · 22 Feb 2014 at 19:04

It is. Buy some plastidip

Elroy · 24 Feb 2014 at 15:25

Would love to see the S2.0 with a reversed mobo tray

parvumsystems · 26 Feb 2014 at 10:49

Elroy said:
Would love to see the S2.0 with a reversed mobo tray

Something we have done with the S1.0 many times as custom options. We will get OCUK some limited stock in reverse layout in the most popular colour ways.

snips86x · 26 Feb 2014 at 11:04

I just wanted to share my gratitude for your superb work with the quality of the case and aesthetics. It was easy to put together, despite the 6mm/10mm screws not fitting my SSDs, easy to transport (i51) and I couldn't be happier.

You have done sterling job!! It's my new pride and joy and the red & black looks stunning paired with the ROG V Gene, braiding and LED fans.

THANKYOU OCUK & PARVUM!!!!!!

TwsT · 27 Feb 2014 at 16:57

snips86x said:
I just wanted to share my gratitude for your superb work with the quality of the case and aesthetics. It was easy to put together, despite the 6mm/10mm screws not fitting my SSDs, easy to transport (i51) and I couldn't be happier.

You have done sterling job!! It's my new pride and joy and the red & black looks stunning paired with the ROG V Gene, braiding and LED fans.

THANKYOU OCUK & PARVUM!!!!!!

Glad you are happy

WalderX · 4 Mar 2014 at 20:27

Really want one of these. Love the direct input from Parvum and OCUK staff - this is how customer service should be done! Bravo

rjk · 25 Jun 2014 at 15:01

PARVUM RESTOCKS ARE HERE !!!

RetrogamerX · 25 Jun 2014 at 15:15

I love this case, but I'm old skool and like a drive bay or 2. Wish these had 5.25 bays?

Pelinox · 26 Jun 2014 at 15:19

That doesn't look... safe.... :eek:

snips86x · 26 Jun 2014 at 15:29

Apem said:
yeah agree cypto they look sweet but dust is my enemy and having filters on the front of these would ruin the look me thinks.

cypto said:
Very good point, unless it was a very fine mesh between the two acrylic sheets at the front. But agree dust isn't my best friend either.

rjkoneill said:
You could always put filters on the inside.

Check out my build log, I've used the DemciFlex filters between the acrylic panels. Works beautifully, but you need fans with high static pressure over CFM to combat heat dissipation!

Unicorn · 26 Jun 2014 at 19:05

snips86x said:
Check out my build log, I've used the DemciFlex filters between the acrylic panels. Works beautifully, but you need fans with high static pressure over CFM to combat heat dissipation!

I saw this, Im going to attempt to use tights on mine have you done this by any chance?

davido_labido · 26 Jun 2014 at 19:35

urgh... parvum doing things for OCUK AGAIN!??!??!

i should be your priority god damn it! i buy you beer and game skins!

these cases look fantastic lads, well done! Well done to OCUK for spotting the potential too! Parvum is certainly top of my list of companies id love to work with for sure!!

snips86x · 26 Jun 2014 at 22:06

Unicorn said:
I saw this, Im going to attempt to use tights on mine have you done this by any chance?

No, but that's a superb idea! Wondering how you'll keep them stretched, but theoretically, it should work.

*** New Product Parvum S 2.0 mATX Cases in Stock!***

* New Product Parvum S 2.0 mATX Cases in Stock!*