* New Raijintek Pan Series Cases *

orbitalwalsh · 17 Mar 2021 at 10:53

Defy Belief said:
True didn't even think of a 240 and 360, this case looks like it could be fun to play around with

Just sent Raijintek your idea along with combo of 240+360. I've mentioned to them I wanted to use their distro plate above the PSU section... should have about 4mm clearance as their plates are 34mm thick with SFX being 63.5 in height .

HoneyBadger said:
@orbitalwalsh - When you get it, could you measure the height of the CPU cooler capability?

I'm wondering if a Alphacool Eisberg reservoir cooler will fit or whether or not it'll be too tall. Can't see any specs on the manual or website!

The Chassis height is 110mm . I'm guessing the motherboard standoffs are standard 10mm with Eisbaer being 60mm tall .. should work . Alphacool sent me their low profile server fittings, which are dam handy !

https://imgur.com/hmgaOO9
About 20mm in height, full rotary

image I was sent from Rep

https://imgur.com/a/8TWcbJ0

orbitalwalsh · 17 Mar 2021 at 14:56

@petedool72

any ETA ?

@Defy Belief

Just looked.. Alphcool's ST30 560 (version 1) would actually fit within the case . They again I see that Raijinteks dimensions differ from whats listed on OCUKs 629×354×174 mm vs 590 x348 x155mm

Defy Belief · 17 Mar 2021 at 18:39

orbitalwalsh said:
@petedool72

any ETA ?

@Defy Belief

Just looked.. Alphcool's ST30 560 (version 1) would actually fit within the case . They again I see that Raijinteks dimensions differ from whats listed on OCUKs 629×354×174 mm vs 590 x348 x155mm

That would be pretty epic!

orbitalwalsh · 17 Mar 2021 at 19:12

Images sent to myself

http://imgur.com/a/L4hGpWP

HoneyBadger · 17 Mar 2021 at 19:16

Those low profile fittings look pretty ace.

orbitalwalsh · 17 Mar 2021 at 19:40

HoneyBadger said:
Those low profile fittings look pretty ace.

The tubing is like 8/11 or 7/11 if I can recall .

Would be nice if Raijintek sold the shell covers in differing colours ! Least that whlay I couldn't feel bad cutting into it !

orbitalwalsh · 31 Mar 2021 at 17:02

Case is coming tomorrow ! Via faster company Caseking Germany... But £47 import charges !!!! Brexit sucks but UPS charging extra on top really is a bug bear !

SirConfused · 1 Apr 2021 at 07:41

orbitalwalsh said:
Case is coming tomorrow ! Via faster company Caseking Germany... But £47 import charges !!!! Brexit sucks but UPS charging extra on top really is a bug bear !

If only the 2 companies were connected somehow... Regardless, pretty sure they still count as a competitor and probably shouldn't be named here.

orbitalwalsh · 1 Apr 2021 at 10:50

SirConfused said:
If only the 2 companies were connected somehow... Regardless, pretty sure they still count as a competitor and probably shouldn't be named here.

Raijintek said I could have waiting for Caseking to ship over to OCUK but said I'd rather get it sooner to get up snaps etc . Seems UK reviewers also had to pay . Just the fact it's only UPS that charge admin fees ontop !

orbitalwalsh · 1 Apr 2021 at 15:22

Box is big....

http://imgur.com/a/RIH8bmS

orbitalwalsh · 4 Apr 2021 at 11:12

Will get on and do a build log... Some reason Imgur has changed so can't embed via phone for images so here's album links

So far

Full fat ATX PSU would fit (need to mod slightly ) but has limitations
Radiators larger then 27mm stated by Raijintek , but would need 90 degree fittings etc
ATX does fit fine without mods , and PCIe actually lines up for a solid PCIe circuit board
Using ITX, is possible to have dual rad set up using 1.5 slot waterblock and 20/25mm rad with slim fan combo
480 fits in across the back - again needs to be slim is using standard ITX , so does 240+360 combo
120mm fits in behind SFX housing just fine

http://imgur.com/a/zzevrjX

View attachment Mhop50F.jpg
View attachment K85GGuL.jpg
View attachment W6TmMsu.jpg
View attachment 7L8ZTAQ.jpg

http://imgur.com/a/zzevrjX

http://imgur.com/a/zzevrjX

http://imgur.com/a/owuuPY7

http://imgur.com/a/az2E95M

LordBeggar · 6 Apr 2021 at 09:08

How is the thermal performance on these cases?

orbitalwalsh · 7 Apr 2021 at 13:51

LordBeggar said:
How is the thermal performance on these cases?

In theory, should be good.. if you set it up in positive and exhausting out the top of the case ! Not how they have shown in media with AIO drawing air from the top and exhausting out the bitten, as the GPU would then suck that air in !

Unfortunately... I got caught short.. cables not long enough so grab some extensions !

And also, for standard ITX build, wanting to add second rad with GPU water block. I lined up a two slot GPU ontop of 20mm rad with 15mm can, and you'd have clear space ! Most likely could use 27/30mm thick rad

orbitalwalsh · 8 Apr 2021 at 15:23

not stated in video! possible cable extension for EPS and 24pin, specially if you have silverstone SFX!

also, mount an AIO so its pulling in air from the bottom of the case, not the top like above

will be doing my own hopefully start of next week

orbitalwalsh · 9 Apr 2021 at 23:32

Just found this out, case does some pretty patterns with RGB lighting .

View attachment aqAX4xK.jpg
I will say, case is a bit louder then most but could be due to position of vents and were it would sit, so good silent fans and nice thick rad !
Got 60mm going in but here's 54mm (actually 45mm in cladding )
View attachment bXp23Qf.jpg

*** New Raijintek Pan Series Cases ***

* New Raijintek Pan Series Cases *