New Ram no video output

w1llyg

w1llyg

w1llyg

Associate
Joined
23 Dec 2009
Posts
549
Hi,

I recently had problems with my OCZ RAM, so ive replaced the RAM with corsair dominator RAM thts on this weeks special.

When i put in the new RAM i started off with one stick..which runs fine.
When i put the other stick in everything seems to run but theres no output onto my monitor...

So when i put the stick tht doesnt work by itself into the 1st slot, still no picture... help
 
Are you running the memory at correct voltage, timings and frequency?

as above post, try a cmos reset or load safe settings.

If still no joy, i would RMA the faulty stick. Make sure your system work with the single working stick in each slot, just to make sure it's not the mmory controller that's at fault.
 
nkata said:
Cmos reset?
Click to expand...

Done, nothing happens.

Admiral Huddy said:
Are you running the memory at correct voltage, timings and frequency?

as above post, try a cmos reset or load safe settings.

If still no joy, i would RMA the faulty stick. Make sure your system work with the single working stick in each slot, just to make sure it's not the mmory controller that's at fault.
Click to expand...

I only have 2x2gb OCZ RAM and 2x2gb corsair.
OCZ i get BSOD, corsair just doesnt post, but yet 1 stick of each is fine.... :S

Essexraptor said:
Just to clarify that this is your motherboard

http://www.gigabyte.com/products/product-page.aspx?pid=3032#sp

and which RAM are you currently trying to fit? :)
Click to expand...

EDIT
Nope its this one http://www.gigabyte.com/products/product-page.aspx?pid=3005#sp

and its this RAM

http://www.overclockers.co.uk/showproduct.php?prodid=MY-288-CS&groupid=701&catid=8&subcat=1517

With the bad RAM it just keeps posting :/
 
Last edited:
Gigabyte GA-MA790FXT-UD5P - motherboard - ATX - AMD 790FX - Socket AM3

probably this one if he is using DDR3, hopefully :)



should have refreshed before posting.
 
My good OCZ works fine with the good Corsair.

I just find it hard to believe that ive had to RMA the OCZ already got a new pair. New problem with them, so i go buy trusty Corsair RAM to find out tht could have to be RMA'd too.

Just doesnt make sense if ive had to RMA 3 sets :S
 
You must log in or register to reply here.
Back
Top Bottom