• Notice regarding image hosts and attachments. See here.

New System Dead Please Help

Associate
Joined
4 Oct 2008
Posts
18
Setup a new system Friday. Installed windows 7 overnight and all was going well. Then Saturday morning it just turned off. When trying to turn it back on there is nothing. The fans, cpu and case fan all run. But the board wouldn't post and there were no visible lights or beeps. I have tried the PSU in another PC and that is fine

The system comprises of:
Azrock Extreme 7 motherboard
2 x MSI 560 GTXTI graphics
Intel I7 2600k
16gb of ddr3 ram
Corsair 120gb SSD

We have RMA'd the board and processor and they are being returned to supplier next week.

Have just tried the graphics cards in another system in Asus P5B Deluxe wifi board and I get 1 long beep and 3 short beeps at poll which indicated a VGA problem. Put the original grahic card back in and its fine.

We are worried that it is not the motherboard or processor and could be the graphics cards. But we can hardly send all the items back, especially since they charge to test and return non faulty items.

Can someone please assist with what might be causing this?

Thanks
 
Take both graphics cards out of the system and plug in the onboard VGA instead and see if it posts. Also clear the CMOS and check to make sure you have all the necessary cables plugged in, such as the 8 pin CPU power cable at the top left of the mobo, the 24 pin MOBO cable on the right of it and the molex for SLI just above the first PCIe 16x port.
 
Take both graphics cards out of the system and plug in the onboard VGA instead and see if it posts. Also clear the CMOS and check to make sure you have all the necessary cables plugged in, such as the 8 pin CPU power cable at the top left of the mobo, the 24 pin MOBO cable on the right of it and the molex for SLI just above the first PCIe 16x port.

Thanks, all the cables were plugged in fine. Like I said, it had been running fine overnight. Surely if the cables were not in right it wouldn't have been on for hours working.
 
Can you try a known good graphics card? Have you tried running on minimum hardware? E.g 1 stick of ram and 1 gpu. Then tried variations on hardware/sockets used. Your psu works but do you know for sure it is capable of powering two 560s?
 
Plug your monitor into the onboard DVI on your motherboard and completely remove both of the graphics cards.
 
Thanks for the replies. Sent everything back for testing and the motherboard and both graphics cards are dead! They are replacing them but I wish I knew what caused it in the first place. I guess the motherboard was dodgy and blew both the cards because it is highly unusual to have 2 faulty gpus surely.
A few people have suggested it could have been the psu. Problem is this seemed to work ok so they didn't ask me to return it.
 
What psu, have you got?

Hello. Corsair modular 850w. I need an extra connector for a third graphic card to run my large monitor but looks like I am stuffed. Corsair don't have any in stock or know when they will ever come in. Can't use the on board because resolutions not high enough.
 
Back
Top Bottom