Ok, so not technically a new bike but it's a new to me bike. I already own a blackbird and, to be honest, is probably one of the best bike I've ever ridden. I've done countless miles in the last 3 years on mine, both in the UK and on the Continent and it hasn't missed a beat.
Anyway, as a Blackbird owner, when an opportunity comes up to buy another one at a bit of a billy bargain price and it's something a bit special, then yeah it's a no brainer for me . I went to see it the other night and it is probably one of the cleanest Blackbirds I've seen for it's age, been REALLY looked after and no expense has been spared in the upkeep of it; there's also a couple of "subtle modifications" that have been completed to a very high standard which will really enhance the riding. Pics and specs below!
Current specs are as follows:
- Running T25/T28 hybrid built by Universal Turbos with custom actuator
- Has a manual boost controller installed
- On Dyno it was last recorded running approx 6/8psi and making 215bhp and 110lbft of torque at the wheel
- Making boost by 4000rpm on the road
- All custom fuel lines and fuel pump, fpr, oil feed and returns etc.
- Running stainless manifold and downpipe to end can
- Custom alloy radiator, intercooler and air box
- Carb oil cooler relocation to allow intercooler setup
- Uprated Barnett clutch plates and springs with uprated Oberon clutch cylinder
- Uprated rear shock YSS
- Cbr954 fireblade USD front end (brakes, master cylinder, clip ons) using 70mm fork extensions with custom triple clamps fitted with taper head race bearings
- Uprated front fork springs
- Dual braking system removed, Honda Nsr rear brake master cylinder
- New EBC front brake discs and HH brake pads
- Avon Sport Touring tyres good condition
- Lightweight 3 spoke cast rear wheel...(2/3kg lighter than oe)
- Uprated regulator rectifier, stator and wiring mod also done
The chap i'm buying it off has done a lot of the work himself, which meant he was able to tell me in detail all the in's and out's of how he has the system set up.
All being well, I'll be picking this up over the next week or so. I feel like a kid at Christmas!
Anyway, as a Blackbird owner, when an opportunity comes up to buy another one at a bit of a billy bargain price and it's something a bit special, then yeah it's a no brainer for me . I went to see it the other night and it is probably one of the cleanest Blackbirds I've seen for it's age, been REALLY looked after and no expense has been spared in the upkeep of it; there's also a couple of "subtle modifications" that have been completed to a very high standard which will really enhance the riding. Pics and specs below!
Current specs are as follows:
- Running T25/T28 hybrid built by Universal Turbos with custom actuator
- Has a manual boost controller installed
- On Dyno it was last recorded running approx 6/8psi and making 215bhp and 110lbft of torque at the wheel
- Making boost by 4000rpm on the road
- All custom fuel lines and fuel pump, fpr, oil feed and returns etc.
- Running stainless manifold and downpipe to end can
- Custom alloy radiator, intercooler and air box
- Carb oil cooler relocation to allow intercooler setup
- Uprated Barnett clutch plates and springs with uprated Oberon clutch cylinder
- Uprated rear shock YSS
- Cbr954 fireblade USD front end (brakes, master cylinder, clip ons) using 70mm fork extensions with custom triple clamps fitted with taper head race bearings
- Uprated front fork springs
- Dual braking system removed, Honda Nsr rear brake master cylinder
- New EBC front brake discs and HH brake pads
- Avon Sport Touring tyres good condition
- Lightweight 3 spoke cast rear wheel...(2/3kg lighter than oe)
- Uprated regulator rectifier, stator and wiring mod also done
The chap i'm buying it off has done a lot of the work himself, which meant he was able to tell me in detail all the in's and out's of how he has the system set up.
All being well, I'll be picking this up over the next week or so. I feel like a kid at Christmas!