NEW ZALMAN GPU COOLERS (NVIDIA AND ATI) - PRE ORDER NOW (NOW WITH ADDED BENCHMARKS)

Soldato
Joined
8 Sep 2003
Posts
23,173
Location
Was 150 yds from OCUK - now 0.5 mile; they moved
Zalman VF3000-A Graphics Card Cooler (ATI 5830/5850/5870) @ £32.99 inc VAT

HS-048-ZA_400.jpg


The heatsink is optimized for high performance during quiet operation, incorporating a switching noise eliminated high capacity dual 92mm fan for intensified cooling performance and minimized noise. The dual 92mm fans cool not only the heatsink and VGA RAM, but all other peripheral components surrounding the VGA chipset. Utilizing Zalman’s latest IHD(Interactive Heat transfer Design) technology in which the high performance heatpipe’s 2-way heat transfer and maximum dissipation area provide powerful cooling performance.

- Dimensions: 239 x 98 x 52mm ( L x W x H)
- Powerful Cooling Performance
- Ultra Quiet Design
- Excellent Peripheral Component Cooling
- High Performance Super Thermal Grease ZM-STG2M
- Adjustable Fan Speed Controller


Only £32.99 inc VAT.

ORDER NOW

-------------------------------------------------

Zalman VF3000-N Graphics Card Cooler (Nvidia GTX260/GTX275/GTX280/GTX285) @ £32.99 inc VAT

HS-049-ZA_400.jpg


The heatsink is optimized for high performance during quiet operation, incorporating a switching noise eliminated high capacity dual 92mm fan for intensified cooling performance and minimized noise. The dual 92mm fans cool not only the heatsink and VGA RAM, but all other peripheral components surrounding the VGA chipset. Utilizing Zalman’s latest IHD(Interactive Heat transfer Design) technology in which the high performance heatpipe’s 2-way heat transfer and maximum dissipation area provide powerful cooling performance.

- Dimensions: 239 x 98 x 52mm ( L x W x H)
- Powerful Cooling Performance
- Ultra Quiet Design
- Excellent Peripheral Component Cooling
- High Performance Super Thermal Grease ZM-STG2M
- Adjustable Fan Speed Controller


Only £32.99 inc VAT.

ORDER NOW
 
hehe i dont have a prob in that dept but the screws made of butter just round off im pretty sure im using the right size driver...would have been nice to get a 2 of these coolers they will go with my rampage 3 lol

What brand of card do you have?
 
Right I have completed some benchmarks using a Club 3D 5870 GFXs card. This has the standard reference board and cooler from AMD/ATI so this is one of the best cards to test with.

I have run Furmark in windowed mode at 1280 x 1024 with the card running at stock speeds.

Stock cooler - 69 degrees
Zalman cooler - High fan speed - 42 degrees
Zalman cooler - Medium fan speed - 38 degrees
Zalman cooler - Lowest fan speed - 38 degrees



Results with Stock cooler
test1.jpg


Results with Zalman cooler - Full fan speed
test1full.jpg


Results with Zalman cooler - Half Fan Speed
test1half.jpg


Results with Zalman cooler - Lowest Fan Speed
test1low.jpg


As you can see the Zalman cooler performance is much better. The fan on the highest setting is audiable at around the same noise level as the stock cooler at the default fan speed.

On medium the noise is just about hearable, but at low speed the noise is none existant.

The results show only minor differences between the fan speeds on the Zalman with the slowest speed still massively outperforming the stock cooler for cooling.

 
There was some of the Zalman paste included, but I opted for Arctic Silver 5 - not because it was better, cos I don't actually know if it is of not on GPU's. But because the paste from Zalman was in a heinz ketchup type packet and Arctic Silver which I had to hand comes in the better push-tubes. :)
 
The delivery looks to be delayed, we are awaiting information from Zalman, which I should be getting tomorrrow morning.
 
Right. Bad news I'm afraid. The shipment to the UK has been delayed till the end of the month now. Partially due to the backlog of air freight deliveries due to the air closures over the last few weeks.
 
Just got any update and stock will be with me tomorrow now!! My apolgies for the wrong info 2 posts up,
 
Back
Top Bottom