NF7-S 2.0: where do I set transfer mode for my SATA HDD?

manveruppd · 5 Mar 2007 at 00:51

My NF7-S has some quite nifty drivers for controlling my IDE hard drives (the window called "NVIDIA nForce ATA Controller" in the screenie below):

However, I can't find an equivalent tool for the SATA drive I just added to my system - where is it?? I rummaged around in Device Manager for a bit, but I tried both the drive's properties window and that of the SiI SATARaid Controller and neither had any options I could set regarding transfer mode and all the other stuff I get in the ATA Controller's properties window! Can anyone point me to the right place?

james.miller · 5 Mar 2007 at 00:54

it doesnt apply to sata. sata will run at either sata1 (150mb) or sata2 (300mb). and thats all done automatically unless you can tell a sata2 drive to run at sata1 speeds with a jumper on the back of the drive. but concidering the nf7-s is only sata1, you dont even need to worry about that.

There's nothing you really need to adjust

james.miller · 5 Mar 2007 at 00:55

delete me

manveruppd · 5 Mar 2007 at 01:13

Awww.... but I LIKE fiddling!

Thanks for the reply!