Hey guys (and girls).
As the title suggests my machine is not getting to POST. I've tried numerous things to get it back up and running but to no avail. I'll list the specs and fixes that I've attempted.
The computer was built in April 2011 by myself with the following specs;
i7 2600k (overclocked to 4.7 GHz for the majority of the last year)
8GB Corsair Vengeance RAM (2x4GB sticks)
Asus P8P967 Pro (B3 Rev.)
6950 XFX Radeon HD Crossfire (Rev. 1 unlocked and slightly overclocked)
Corsair AX850W PSU
120GB OCZ Vertex 3
2TB Samsung Spinpoint F3 RAID0
Up until now there have only been minor problems, namely, getting Crossfire to play nice sometimes. These problems were quite easily fixed and I haven't had any other problems with the hardware.
The computer didn't POST yesterday morning when I attempted to turn the computer on - no motherboard sounds and no error lights. I opened it up and had a gander inside and thought it to be a little dusty. I proceeded to clean it up a little then I plugged the kettle lead back in and attempted to boot it up with no success. My first course of action was to remove one of the graphics cards which also yielded no success so I removed the next GPU and it booted up! I replaced both GPUs and the computer booted up just fine and continued to be well for the rest of the day. I did check a few things once it had booted up and everthing was as it should be - no overheating issues, no unrecognised hardware, MEMTEST passed etc.
This morning the same problem occurred except the removal of the GPUs did not fix the problem this time round. I kept the GPUs disconnected and moved on to the next suspects; the RAM. I also removed the motherboard battery to clear CMOS just in case. I fiddled about with the RAM - alternating slots etc. this was largely unsuccessful except the computer did boot up once with just 1 stick of RAM. It has not done this again since despite several attempts of differing compositions of components.
On rare occasions the fans have twitched but only after turning off the PSU and removing the kettle lead for several minutes.
Other relevants things I've tried;
Any help and suggestions you guys or girls can offer would be much appreciated!
As the title suggests my machine is not getting to POST. I've tried numerous things to get it back up and running but to no avail. I'll list the specs and fixes that I've attempted.
The computer was built in April 2011 by myself with the following specs;
i7 2600k (overclocked to 4.7 GHz for the majority of the last year)
8GB Corsair Vengeance RAM (2x4GB sticks)
Asus P8P967 Pro (B3 Rev.)
6950 XFX Radeon HD Crossfire (Rev. 1 unlocked and slightly overclocked)
Corsair AX850W PSU
120GB OCZ Vertex 3
2TB Samsung Spinpoint F3 RAID0
Up until now there have only been minor problems, namely, getting Crossfire to play nice sometimes. These problems were quite easily fixed and I haven't had any other problems with the hardware.
The computer didn't POST yesterday morning when I attempted to turn the computer on - no motherboard sounds and no error lights. I opened it up and had a gander inside and thought it to be a little dusty. I proceeded to clean it up a little then I plugged the kettle lead back in and attempted to boot it up with no success. My first course of action was to remove one of the graphics cards which also yielded no success so I removed the next GPU and it booted up! I replaced both GPUs and the computer booted up just fine and continued to be well for the rest of the day. I did check a few things once it had booted up and everthing was as it should be - no overheating issues, no unrecognised hardware, MEMTEST passed etc.
This morning the same problem occurred except the removal of the GPUs did not fix the problem this time round. I kept the GPUs disconnected and moved on to the next suspects; the RAM. I also removed the motherboard battery to clear CMOS just in case. I fiddled about with the RAM - alternating slots etc. this was largely unsuccessful except the computer did boot up once with just 1 stick of RAM. It has not done this again since despite several attempts of differing compositions of components.
On rare occasions the fans have twitched but only after turning off the PSU and removing the kettle lead for several minutes.
Other relevants things I've tried;
- Reseating the cooler and CPU
- Leaving only the essentials connected
- Swapping around the graphics cards
- Toggling the GPU BIOS switches to revert them back to stock BIOS
Any help and suggestions you guys or girls can offer would be much appreciated!

, unless you are lucky with retailer if they take it back, but after close to a year they usually refer you to the manufacturer