• Notice regarding image hosts and attachments. See here.

No post, what to try?

Associate
Joined
9 Jun 2009
Posts
348
Hi there I went on holidsay, came back turned on my computer which had been working correctly before I left, and it powered up' yet nothing appeared on the scrren, or it didn't beep. So basically it turns on, powers up nothing appears on the screen, and no sounds come from it. The only things I have tried are resetting the cmos, trying a different monitor, and putting the graphics card in another computer, so its not that.

What do I do now? What could it be.

Thanks in advanced :-)
 
I'm guessing no fans are spinning inside the computer including the one on the PSU if applicable? Check the fuse in the cable leading to the PSU if applicable. If that's not it then it's time to open the computer up and have a look. Reseat all power connections and try again.

Make sure the power switch port is connected properly to the pins on the motherboard etc. Try unplugging everything except the Motherboard and powering on.

To test the PSU individually, remove all connections on the motherboard except one invaluable component, for example your cd drive or a fan. Then short out the pins where there is a green wire and a black one. The diagrams below are much more specific on the ATX connector. If the fan/cd drive begins to power up, the PSU may still be fine. The diagram below shows the pins.

http://i.imgur.com/cyQww.gif[img]

After this it may be time to consider one of your parts has blown. Do you have a good branded power supply or a generic? (It'll be on the side of the PSU)
 
Back
Top Bottom