Noob Overclocking Help

hellarda · 30 Aug 2008 at 16:58

hi

i have a striker 2 formula and a Q6600 @ 3115Mhz 1.44 Vcore (1.39 Actual), 3.125 VID, 1.46 NbCore. i know i can get more from this chip but can't seem to be able to. i am not a very experienced overclocker so i don't want to touch anything i don't i don't know about. The CPU loads @ 55C so i can put more voltage through if needs be.
The NB loads at about 60C so again more voltage can be applied.
i cant seem to be able to push it any higher.
Is there anything else I should be changing or tweaking?

please Help

Thanks

hellarda · 30 Aug 2008 at 17:32

i have 2x 1gb of kingston hyperx RAM running unlinked @ 1050Mhz (it is rated at 1150Mhz) with 2.16V through it

hellarda · 30 Aug 2008 at 18:31

there on auto and the ram is unlinked so it stays at the speed i say

hellarda · 31 Aug 2008 at 09:26

i've got a 60mm CPU Fan, from an old AMD System, about 2mm way from the nb and then a loo roll pointing from a scyther 110CFM fan to the 60mm fan over the northbridge.
As i have a a Zalman CNPS9700 it resricts the amount of cooling over the northbirdge i can only just get the 60 mm fan underneath it.
Are there any better solutions?