• Notice regarding image hosts and attachments. See here.

Now this is very weird.....

Associate
Joined
16 Apr 2010
Posts
327
GTX 285 blew. Thought it was the PSU but not. New PSU. Bit of smoke from the GTX 285. Inserted spare GTS 250 and connected to my Matrox TH2GO DE and all good.

Tried my OC to 3.442 (from 2.667 stock), rebooted and got a GTS 250 post screen and it hung there. Connected an old Acer 19" monitor to the VGA port of the GTS 250 (left the DVI of the TH2GO connected) and it rebooted no problem!

It appears that from a cold start it needs the Acer connected....why?
 
Here's an update. After 4 hours of System restore, reboot, system restore, etc. I decided to drop the GTS 250 to my second PCI slot and all is now okay. I'm convinced it was / is a driver issue but could it be something else?
 
Just to be sure.. GTX 285 smoked and GTS 250 in same slot didn't work. After 4 hours of restores, reboots, etc. you move it to second slot and it now works. My guess is slot issue.
 
Normally it doesn't, but when things short out all bets are off... and if GPU works in one slot and not other it's probably the slot. ;)
 
I thought that my Gigabyte PSU (GE-800A-D1) would protect against damage to the MB?

As Doyll said once something has blown all bets are off - that power has to discharge somewhere, the PSU will do it's best to prevent spikes etc. from reaching components but no system is 100% protected.
 
one is one..

other is other. ;)

There are all kinds of traces and little connector strips in slot and on board. Any one of them goes out and slot won't work.
 
I've had a good look at the connector on the GPU and it looks fine, no burn marks, nothing that would indicate any kind of short circuit, etc. I wonder if there's any kind of utility that can test it fully, etc?
 
Back
Top Bottom