• Notice regarding image hosts and attachments. See here.

NZXT 440 Advice Please!

Associate
Joined
2 Apr 2009
Posts
17
Hi all,

Just got a white NZXT 440 (Mid Tower).
Just trying to figuer out what size rad to use.
At the moment I,m just going to water cool the cpu, but will do the graphics later.
I likes the idea and design of XSPC Dual bay res but no good for the 440.
I'm looking at a 360mm rad in the front with Noctu NF-12 taken the place of the originals. Push air over rad and rear and top exaust.
I was interedted in one of these http://www.ebay.co.uk/itm/261502495338?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT
but weren't sure if it was too thick 360mm and 60mm

Is this over kill?
Would the new Corsair http://www.ebay.co.uk/itm/121299508216?_trksid=p2055119.m1438.l2649&ssPageName=STRK:MEBIDX:IT be a better choice?

Allready have EK DDC 3.2 PWM X-RES 100 Pump & Reservoir Pump Top, getting the XSPC Raystorm cpu block.

All suggestions much appreciated.
 
If you're planning to do the graphics cards later then I'd probably just not even bother with the Corsair all in one cooler as its just going to be wasted come time to cool your cards.

I'm using the H440 so perhaps can offer you some advice. A good rule of thumb for watercooling is one 120mm rad space for each thing you want to cool plus one extra. So if you're going to be cooling just the CPU and one graphics card you're right in thinking to go for a 360mm rad. The extra thick one you're looking at too looks perfect, especially if you're going to be using noctua fans. If you're going to be cooling two cards it might be worth getting a slimline 240mm rad in the roof but that could be overkill unless you're going to be really pushing everything. As long as you're aware that you will lose all of the HDD bays when using the front rad then I don't see any problems.
 
Back
Top Bottom