• Notice regarding image hosts and attachments. See here.

OBD 2 diagnostic scanner

Soldato
Joined
5 Aug 2013
Posts
6,990
Location
Shropshire
After all the trouble I have had with MoT I wouldn't have found problem if my mate over the road hadn't bought a scanner a few weeks ago.
He plugged it in and it showed a MAF sensor problem - I have never had a engine light or warning show up on the dash so that was before the MoT and after it failed this was first thing I focused on and it was correct -new MAF sensor and all emissins were OK.

It has occured to me that having one of these readers now would be a good idea - I am not talking £200+ like mates but something that I could just plug in now and again just to check that things are OK.
So can anyone reccomend one for £50 or less that can do a basic job.

I did google earlier on and after a while I got the rolling eyeballs with taking in too much info and then not knowing if they all apply to petrol and diesel engines.

Launch or similar was some of those I was looking at although they are less than £30 - so if I am going to buy one is there a better one nearer £50 than the Launch.

car is a 2010 Ford Focus 2.0 ltr Duratec Diesel

Thanks
 
I bought the Carista one a few years ago. It was designed to to be used with the Carista app which lets you muck around with certain hidden convenience functions in the ECU. However, it's just a Bluetooth OBD2 dongle, so I connected it to my phone, and with the Torque Pro app (which was only a couple of quid), I've been able to use it to read codes a few times. Just last week I used it to diagnose why the engine light was on in my sister's aging Toyota Yaris. Turned out to be a fairly common P0420 code for the oxygen sensor, probably as a result of it being left for weeks on end and only doing short trips. It will even let you clear the code from the dash so you can see if it returns.

It's not comprehensive - I think Torque Pro will only show generic engine codes, so manufacturer specific ones may need a proper scan tool. But as you say, it's a handy tool to keep around.
 
Another vote for FORscan, used it on my past 2 mondeos and it's been great, very handy!
 
I use a £4.99 Bluetooth thing I bought from eBay 5 years ago and the torque app in my android phone

This.

I have a creaderv but these days I just use my Elm3x BT dongle and Torque Pro.

Infact I use my old spare phone as a real-time data readout to monitor things like coolant temps, knock timing, o2 sensors etc...
 
I already have one of those plug in things but it isn't a ELM one - I did spend a hour trying to get it to talk to my Android radio but no luck and anyway I just wanted a plug and play as all that wifi/bluetooth makes my head ache.
Something simple just to check for fault codes but after I went through the links above a load of other readers came up so just need to see if they include Ford in the list.
If I need to delve too deep I will just ask mate over the road to plug his in.
Thanks for the replies
 
Not that simple for Ford you want an adapter that has MS Can and HS Can, then use Forscan, dont waste your time with anything else.
 
I broke down and bought a Foxwell NT301 - I do not like using the phone apps.

Just plug it in and away it goes. Already updated software so that's me sorted and no faults
 
My 2 pennies worth for basic fault reading -

If you want a standalone unit, Autel MS309 or Al319; roughly £20-35 mark.

If you want a 'dongle' (phone/PC), then ignore WiFi units and opt for one that is Bluetooth based; i currently have a Viecar (https://www.amazon.co.uk/Viecar-Bluetooth-Android-Diagnostic-Multi-brands/dp/B01MTKSCEJ) and it works fine for the basics.
Re. apps - Torque Pro is OK; CarScanner is quicker to read fault codes.

Personally, FORScan (Windows variant not the mobile Lite app) is great but you need a decent adapter (OBDLink etc; i haven't had much luck with eBay specials with MS/HS switches), especially if you want to program, and pay for the extended licensing to get the most out of it.
 
My 2 pennies worth for basic fault reading -

If you want a standalone unit, Autel MS309 or Al319; roughly £20-35 mark.

If you want a 'dongle' (phone/PC), then ignore WiFi units and opt for one that is Bluetooth based; i currently have a Viecar (https://www.amazon.co.uk/Viecar-Bluetooth-Android-Diagnostic-Multi-brands/dp/B01MTKSCEJ) and it works fine for the basics.
Re. apps - Torque Pro is OK; CarScanner is quicker to read fault codes.

Personally, FORScan (Windows variant not the mobile Lite app) is great but you need a decent adapter (OBDLink etc; i haven't had much luck with eBay specials with MS/HS switches), especially if you want to program, and pay for the extended licensing to get the most out of it.
Why would you pay for the extended license when it's free. Best used with a cable adapter otherwise like you say really needs a decent quality obdlink Mx+ or similar. The amount of tweaks I've made to my car is unbelievable.
 
My 2 pennies worth for basic fault reading -

If you want a standalone unit, Autel MS309 or Al319; roughly £20-35 mark.

If you want a 'dongle' (phone/PC), then ignore WiFi units and opt for one that is Bluetooth based; i currently have a Viecar (https://www.amazon.co.uk/Viecar-Bluetooth-Android-Diagnostic-Multi-brands/dp/B01MTKSCEJ) and it works fine for the basics.
Re. apps - Torque Pro is OK; CarScanner is quicker to read fault codes.

Personally, FORScan (Windows variant not the mobile Lite app) is great but you need a decent adapter (OBDLink etc; i haven't had much luck with eBay specials with MS/HS switches), especially if you want to program, and pay for the extended licensing to get the most out of it.

Why ignore WiFi units?

Having used both option I find WiFi to be quicker in all aspects of communication, particularly senson polling. The faster connection speeds mean I can set polling rates a lot higher than BT meaning less lag in sensor data updating the displays (Torque Pro)

The only downside really only applies if your phone isn't capable of using both WiFi and Mobile data simulateanously.
 
Why would you pay for the extended license when it's free.

Because you get access to the service module and a few other features which is handy.

Why ignore WiFi units?

Personal experience from using a handful of ELM based WiFi ODBII dongles where they struggle to sustain a connection to laptop/phone or keep up with the transmission/baud rates. Even tried a OBXLink MX WiFi and FORScan didn't want to know - although they don't seem to recommend using them either (https://forscan.org/forum/viewtopic.php?t=6142).

Whereas the three Bluetooth dongles (ELM based) i've got all seem to work for basic fault reading and sensor reading/graphing - wouldn't use them for programming obviously.

No doubt people have had success with some WiFi dongles but as said, it's just my experience, hence the "My 2 pennies" :)

Saying that, if i was starting from scratch and needed to do a bit more than basic fault reading, i'd just grab a Viaken (£35/40) or a OBDLink EX (£60/70) and just use a laptop (and FORScan if dealing with Ford/Mazda etc).
 
Because you get access to the service module and a few other features which is handy.

I know. It's still free. I've never paid for it and do everything. Digital speedo enabled, Lincoln mirror mode, auto lock enabled, changed power to the power points to off with the car, enabled full tpms readout, changed the number of indications for lane changing, plus lots more.
 
Anyone using this?

https://www.amazon.co.uk/6030P-Read...2&hvtargid=pla-1168301335915&psc=1&th=1&psc=1

61S+JVqruNS._AC_SL1500_.jpg
 
Back
Top Bottom