I'm having a few odd issues with my PC and I thought I'd ask if anyone here had seen anything similar.
I upgraded from a Conroe E6600 in May last year. One of the few things to be transferred from the old system was the disk array, 3 x 250GB Seagate disks in a RAID 0 stripe and partitioned into OS and Data. This has been working faultlessly since 2007.
Just before Christmas, I started to have issues with one of the drives dropping out of the array, which is obviously fairly problematic with your OS being on the RAID 0 stripe. I bought a new SSD for the OS, reinstalled Windows 7 and ran all 3 HD drives through the Seatools long disk check which raised no issues at all. I then reconfigured the disks for 2 x disks in RAID 0 for Apps and the disk that had been dropping out was used for Data (the thinking being that Data is backed up regularly and it would be easy to replace the disk if it subsequently failed).
Sure enough, the data disk started to go missing from Windows so I assumed there was an intermittent controller issue with the drive. I replaced it with a new-ish 160GB drive. Oddly, the issue kept happening. Everything would be fine and suddenly, everything would run slowly for a bit and the disk would just vanish from Windows. Sometimes it came back by itself, sometimes it needed a reboot.
I've changed the power and SATA cables but that hasn't fixed it either. I've now moved the disk from the ICH10 controller to the Marvell controller because I can't see any other conclusion other than it being a controller issue (or maybe a port/connector issue on the mobo). Both the OS SSD and RAID 0 Apps drives are connected to the same ICH10 controller and are unaffected.
Any other suggestions?
Ian A.
Current rig:
Asus P8P67 Pro
Intel i5 2500k - overclocked to 4.6Ghz (standard BCLK)
Silver Arrow CPU cooler
8GB Corsair XMS3
ATI Radeon HD6950 2GB
Soundblaster X-Fi
Corsair AX750 PSU
I upgraded from a Conroe E6600 in May last year. One of the few things to be transferred from the old system was the disk array, 3 x 250GB Seagate disks in a RAID 0 stripe and partitioned into OS and Data. This has been working faultlessly since 2007.
Just before Christmas, I started to have issues with one of the drives dropping out of the array, which is obviously fairly problematic with your OS being on the RAID 0 stripe. I bought a new SSD for the OS, reinstalled Windows 7 and ran all 3 HD drives through the Seatools long disk check which raised no issues at all. I then reconfigured the disks for 2 x disks in RAID 0 for Apps and the disk that had been dropping out was used for Data (the thinking being that Data is backed up regularly and it would be easy to replace the disk if it subsequently failed).
Sure enough, the data disk started to go missing from Windows so I assumed there was an intermittent controller issue with the drive. I replaced it with a new-ish 160GB drive. Oddly, the issue kept happening. Everything would be fine and suddenly, everything would run slowly for a bit and the disk would just vanish from Windows. Sometimes it came back by itself, sometimes it needed a reboot.
I've changed the power and SATA cables but that hasn't fixed it either. I've now moved the disk from the ICH10 controller to the Marvell controller because I can't see any other conclusion other than it being a controller issue (or maybe a port/connector issue on the mobo). Both the OS SSD and RAID 0 Apps drives are connected to the same ICH10 controller and are unaffected.
Any other suggestions?
Ian A.
Current rig:
Asus P8P67 Pro
Intel i5 2500k - overclocked to 4.6Ghz (standard BCLK)
Silver Arrow CPU cooler
8GB Corsair XMS3
ATI Radeon HD6950 2GB
Soundblaster X-Fi
Corsair AX750 PSU
WTF?