The postman arrived
Nice get them fitted I would like too know what sort of increase you get from air to water
-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
***Official MSI GTX 680 Power Edition Owners Club***
- Thread starter Jerry64
- Start date
Nice get them fitted I would like too know what sort of increase you get from air to water
Nice Pair 
Got two of these bad boys arriving tomorrow!
So excited.
Can you guys help me get e'm to 1.3ghz core and 7ghz V-ram
7ghz on the vram should be doable not to sure about 1.3ghz on the core
1267/1280 for benching on mine is the highest I have got
Jerry is that using AB?
I'm not use to these gpus, u think you raise core and the card still boosts above that?
What do I set power limit to?
Well mine will only go 23mhz above stock it seems
mem is ok at 7GHZ
Yes using AB check first post all the info is there that you need will mean a bit reading
You need to unlock voltage download this version of AB
http://www.guru3d.com/files_details/..._download.html Download this version 3.0.0 Beta 14 (SE for 680/770 Lightning editions)
then read first post in this link
http://www.overclock.net/t/1280007/official-msi-gtx-680-lightning-owners-club
the bit about unlocking voltage
[Settings]
VDDC_Generic_Detection = 0
VDDC_CHL8318_Detection = 46h
VDDC_CHL8318_Type = 1
once that's done you will have more volts and if you need more then use this
http://www.overclock.net/t/1398725/u...tx460-with-llc Rbby258 ABvoltmob
http://www.guru3d.com/files_details/..._download.html Download this version 3.0.0 Beta 14 (SE for 680/770 Lightning editions)
then read first post in this link
http://www.overclock.net/t/1280007/official-msi-gtx-680-lightning-owners-club
the bit about unlocking voltage
[Settings]
VDDC_Generic_Detection = 0
VDDC_CHL8318_Detection = 46h
VDDC_CHL8318_Type = 1
once that's done you will have more volts and if you need more then use this
http://www.overclock.net/t/1398725/u...tx460-with-llc Rbby258 ABvoltmob
what was the error message?
I'll try again and see what the message is.
Oh and is LN2 BIOS with switch to the right?
Because Gpu-z is showing the exact same Bios in either switch position?
Ok my bad I wasn't installing vers 14 of the 3.0 beta like you said I tried another version which didn't work, this one does now
Yes to the right and you need to flash a LN2 bios on there 80.04.28.00.3A
https://docs.google.com/file/d/0ByaqIKti5kitakRWSnlYV0RkTFk/edit?usp=drive_web&pli=1
Have fun you should get 1200+ now
Up both for benching I have gone to 1.36/8 to get tops 1267/1280 core my memory goes to 7800 bench but 24/7 1.25 to 1.27 volts should be fine
for bench 300% no probs
no probs