Optimizing System

Associate
Joined
28 Aug 2011
Posts
360
Location
North West Kent
Here is my PC, i want to optimize the airflow/cooling/anything, just want to pimp it.

UNdOtdJl.jpg.png

2Yl8pyHl.jpg.png

1JFQ5dSl.jpg.png

Wmt7gOYl.jpg.png


My 770 Arrives on Monday
 
So i followed a guide about the 920 about configuring it properly etc, the fans are now on full whack, is it bad for it to normally idle at 43c ?
 
Ok so re-seated the cpu, heatsink. Made it so pumps at bottom (Read that is better) Rad would not fit on top due to OCGenie Lump. Fitted top fan on front of case for more cold draw. Also did cable management, whats next?

F7efA4Vl.jpg.png
 
it's a case.

you said you wanted to pimp the airflow/cooling - not really going to get more out of the components you have.

I wouldn't spend money though, don't think it's worth it... but if you want more... spend

The only things i can do is replace the cooler and the case?

What about another inlet fan on the roof?
 
air should come in at the front/bottom and out at the back/top

adding another fan on the roof isn't going to do much, I'd be thinking more about removing the one that's there - gotta think about what direction that goes in and what direction the 920 goes in and see if they're fighting each other

I did remove it from the top as it was battling the 920, moved it to the front as another inlet. I would go for a new case but the 920 is a pain to fit.
 
Back
Top Bottom