Orthos error

Slinwagh · 11 May 2007 at 21:08

Orthos is currently failing for me roughly after 12 minutes, settings are as follows.

CPU 333 x 9
Mem 416MHz @ 2.15v
CPU 1.3625v
PCI-E 101 MHz
PCI Clock 33.33 MHz

RAM 4, 4, 4, 12 35 2T.

I have also ran Memtest and there were no errors through 2 full passes.

Do you think Orthos fails due to the CPU or RAM or a combination of both?

Jokester · 11 May 2007 at 21:10

Give Vcore a bump and see.

Jokester

Slinwagh · 11 May 2007 at 23:45

I have upped the vcore to 1.3750 and Orthos ran for 24 minutes before there was an error.

Cob · 11 May 2007 at 23:47

Go to 1.4v.

Street · 12 May 2007 at 00:19

Don't be afraid of a few more volts!

I run mine at 1.475V 24/7...

Slinwagh · 12 May 2007 at 10:26

This morning I have just tried 375 x 8 and Orthos ran for 1h 6m before it failed.

Everything else as above.

Cob · 12 May 2007 at 13:08

Slinwagh said:
This morning I have just tried 375 x 8 and Orthos ran for 1h 6m before it failed.

Everything else as above.

What vcore?

As already said, don't be scared to push it up. Just try to keep your Orthos load temps under 65c.

chaosophy · 12 May 2007 at 13:17

What are your other voltages set at in bios? you might need to up the north bridge to help with the mem's o/c.

Slinwagh · 12 May 2007 at 13:33

chaosophy said:
What are your other voltages set at in bios? you might need to up the north bridge to help with the mem's o/c.

NB and SB are Auto.

I have been running at 1.4v for the past 3 hours and Orthos is still running with no errors.

chaosophy · 12 May 2007 at 15:23

Try setting SB to the first/lowest setting and NB on it's second setting.

Slinwagh · 18 May 2007 at 20:11

I am now stable at 8 x 380 with the vCore at 1.4125