Overclock/Instability all around

[oggiet]

Yeah might be good idea to rma your mobo, hope its still in warrenty. Just wanted to make sure you were using latest memtest

 

[Meloco]

Yeah might be good idea to rma your mobo, hope its still in warrenty. Just wanted to make sure you were using latest memtest

Damn, I will try both tests and run it a few more times. But with the random blue screens now, it must be the mobo

edit: I just ran prime again, and one of the cpu's keeps on failing after 2 tests.

 

[Big.Wayne]

I just ran prime again, and one of the cpu's keeps on failing after 2 tests.

Which Prime test is that? Blend, Small FFTs, Large In Place FFts?

 

[Meloco]

Which Prime test is that? Blend, Small FFTs, Large In Place FFts?

I did the blend test.

 

[setter]

Blend failing usually equates to a memory or chipset voltage error.

 

[Meloco]

Blend failing usually equates to a memory or chipset voltage error.

edit: sorry, is this undervoltage in either?

 

[setter]

I had a few issues running blend if my NB voltage was set to low or memory voltage to low.

 

[Meloco]

I had a few issues running blend if my NB voltage was set to low or memory voltage to low.

Just sorted out the ram voltages and cpu voltages, now passing prime an hour in .

Could this be a mobo problem afterall?

 

[setter]

Hard to know tbh, i once had a mobo that was throwing up a lot of errors to do with memory, finally discovered that the board was borked after testing several known working ram sticks in it, id lrt prime run for a while longer and see how it goes.

 

[Meloco]

Just been running prime for another hour... touch wood all seems to be ok.

Completely baffeled as to what was causing all the problems. Clock set at 3.6ghz, ram timings at 5-5-5-18..

 

[oggiet]

If its the mobo you might not necessarily get errors while pc is on. I had problems with mine when pc was restarted or cold boot up. Hopefully all your issues are gone