overclock

Ace Modder · 7 Jul 2007 at 13:41

my AMD X2 3800 has been pushed to 225 x 10

If I increase over 230FSB I get errors in orthos, would increasing the voltage help?

kkthxbye · 7 Jul 2007 at 13:57

What are your temps? If they are fine then, up the voltage as little as poss and try again.

P.S keep an eye on temps

El Jimben · 7 Jul 2007 at 13:59

If your RAM is DDR400 and you're running it at 1:1 with the HTT/FSB then you'll be overclocking it too. You either need to loosen the timings or put the RAM on a 166 divider. Then once you're back at 240 FSB/HTT, it'll be running @ 200MHz again.

Ace Modder · 7 Jul 2007 at 14:24

my RAM is DDR2, and I have set a divider so its currently running below the rated speed by about 15mhz

My temp at 225 x 10 are 38-40 full load

schumi84 · 7 Jul 2007 at 18:06

Those temps look fine tbh, just increase things in small increments and see how u go.

Let us know how u get on.